Bitcoin Developer Guide
Find detailed information about the Bitcoin protocol and related specifications.
The Developer Guide aims to provide the information you need to understand Bitcoin and start building Bitcoin-based applications, but it is not a specification. To make the best use of this documentation, you may want to install the current version of Bitcoin Core, either from source or from a pre-compiled executable.
Questions about Bitcoin development are best asked in one of the Bitcoin development communities. Errors or suggestions related to documentation on Bitcoin.org can be submitted as an issue or posted to the bitcoin-documentation mailing list.
In the following documentation, some strings have been shortened or wrapped: “[…]” indicates extra data was removed, and lines ending in a single backslash “\” are continued below. If you hover your mouse over a paragraph, cross-reference links will be shown in blue. If you hover over a cross-reference link, a brief definition of the term will be displayed in a tooltip.
The block chain provides Bitcoin’s public ledger, an ordered and timestamped record of transactions. This system is used to protect against double spending and modification of previous transaction records.
Each full node in the Bitcoin network independently stores a block chain containing only blocks validated by that node. When several nodes all have the same blocks in their block chain, they are considered to be in consensus. The validation rules these nodes follow to maintain consensus are called consensus rules. This section describes many of the consensus rules used by Bitcoin Core.
Block Chain Overview
The illustration above shows a simplified version of a block chain. A block of one or more new transactions is collected into the transaction data part of a block. Copies of each transaction are hashed, and the hashes are then paired, hashed, paired again, and hashed again until a single hash remains, the merkle root of a merkle tree.
The merkle root is stored in the block header. Each block also stores the hash of the previous block’s header, chaining the blocks together. This ensures a transaction cannot be modified without modifying the block that records it and all following blocks.
Transactions are also chained together. Bitcoin wallet software gives the impression that satoshis are sent from and to wallets, but bitcoins really move from transaction to transaction. Each transaction spends the satoshis previously received in one or more earlier transactions, so the input of one transaction is the output of a previous transaction.
A single transaction can create multiple outputs, as would be the case when sending to multiple addresses, but each output of a particular transaction can only be used as an input once in the block chain. Any subsequent reference is a forbidden double spend—an attempt to spend the same satoshis twice.
Because each output of a particular transaction can only be spent once, the outputs of all transactions included in the block chain can be categorized as either Unspent Transaction Outputs (UTXOs) or spent transaction outputs. For a payment to be valid, it must only use UTXOs as inputs.
Ignoring coinbase transactions (described later), if the value of a transaction’s outputs exceed its inputs, the transaction will be rejected—but if the inputs exceed the value of the outputs, any difference in value may be claimed as a transaction fee by the Bitcoin miner who creates the block containing that transaction. For example, in the illustration above, each transaction spends 10,000 satoshis fewer than it receives from its combined inputs, effectively paying a 10,000 satoshi transaction fee.
Proof Of Work
The block chain is collaboratively maintained by anonymous peers on the network, so Bitcoin requires that each block prove a significant amount of work was invested in its creation to ensure that untrustworthy peers who want to modify past blocks have to work harder than honest peers who only want to add new blocks to the block chain.
Chaining blocks together makes it impossible to modify transactions included in any block without modifying all subsequent blocks. As a result, the cost to modify a particular block increases with every new block added to the block chain, magnifying the effect of the proof of work.
The proof of work used in Bitcoin takes advantage of the apparently random nature of cryptographic hashes. A good cryptographic hash algorithm converts arbitrary data into a seemingly random number. If the data is modified in any way and the hash re-run, a new seemingly random number is produced, so there is no way to modify the data to make the hash number predictable.
To prove you did some extra work to create a block, you must create a hash of the block header which does not exceed a certain value. For example, if the maximum possible hash value is 2256 − 1, you can prove that you tried up to two combinations by producing a hash value less than 2255.
In the example given above, you will produce a successful hash on average every other try. You can even estimate the probability that a given hash attempt will generate a number below the target threshold. Bitcoin assumes a linear probability that the lower it makes the target threshold, the more hash attempts (on average) will need to be tried.
New blocks will only be added to the block chain if their hash is at least as challenging as a difficulty value expected by the consensus protocol. Every 2,016 blocks, the network uses timestamps stored in each block header to calculate the number of seconds elapsed between generation of the first and last of those last 2,016 blocks. The ideal value is 1,209,600 seconds (two weeks).
If it took fewer than two weeks to generate the 2,016 blocks, the expected difficulty value is increased proportionally (by as much as 300%) so that the next 2,016 blocks should take exactly two weeks to generate if hashes are checked at the same rate.
Because each block header must hash to a value below the target threshold, and because each block is linked to the block that preceded it, it requires (on average) as much hashing power to propagate a modified block as the entire Bitcoin network expended between the time the original block was created and the present time. Only if you acquired a majority of the network’s hashing power could you reliably execute such a 51 percent attack against transaction history (although, it should be noted, that even less than 50% of the hashing power still has a good chance of performing such attacks).
The block header provides several easy-to-modify fields, such as a dedicated nonce field, so obtaining new hashes doesn’t require waiting for new transactions. Also, only the 80-byte block header is hashed for proof-of-work, so including a large volume of transaction data in a block does not slow down hashing with extra I/O, and adding additional transaction data only requires the recalculation of the ancestor hashes in the merkle tree.
Block Height And Forking
Any Bitcoin miner who successfully hashes a block header to a value below the target threshold can add the entire block to the block chain (assuming the block is otherwise valid). These blocks are commonly addressed by their block height—the number of blocks between them and the first Bitcoin block (block 0, most commonly known as the genesis block). For example, block 2016 is where difficulty could have first been adjusted.
Multiple blocks can all have the same block height, as is common when two or more miners each produce a block at roughly the same time. This creates an apparent fork in the block chain, as shown in the illustration above.
When miners produce simultaneous blocks at the end of the block chain, each node individually chooses which block to accept. In the absence of other considerations, discussed below, nodes usually use the first block they see.
Eventually a miner produces another block which attaches to only one of the competing simultaneously-mined blocks. This makes that side of the fork stronger than the other side. Assuming a fork only contains valid blocks, normal peers always follow the most difficult chain to recreate and throw away stale blocks belonging to shorter forks. (Stale blocks are also sometimes called orphans or orphan blocks, but those terms are also used for true orphan blocks without a known parent block.)
Long-term forks are possible if different miners work at cross-purposes, such as some miners diligently working to extend the block chain at the same time other miners are attempting a 51 percent attack to revise transaction history.
Since multiple blocks can have the same height during a block chain fork, block height should not be used as a globally unique identifier. Instead, blocks are usually referenced by the hash of their header (often with the byte order reversed, and in hexadecimal).
Every block must include one or more transactions. The first one of these transactions must be a coinbase transaction, also called a generation transaction, which should collect and spend the block reward (comprised of a block subsidy and any transaction fees paid by transactions included in this block).
The UTXO of a coinbase transaction has the special condition that it cannot be spent (used as an input) for at least 100 blocks. This temporarily prevents a miner from spending the transaction fees and block reward from a block that may later be determined to be stale (and therefore the coinbase transaction destroyed) after a block chain fork.
The raw transaction format is hashed to create the transaction identifier (txid). From these txids, the merkle tree is constructed by pairing each txid with one other txid and then hashing them together. If there are an odd number of txids, the txid without a partner is hashed with a copy of itself.
The resulting hashes themselves are each paired with one other hash and hashed together. Any hash without a partner is hashed with itself. The process repeats until only one hash remains, the merkle root.
For example, if transactions were merely joined (not hashed), a five-transaction merkle tree would look like the following text diagram:
ABCDEEEE .......Merkle root / \ ABCD EEEE / \ / AB CD EE .......E is paired with itself / \ / \ / A B C D E .........Transactions
As discussed in the Simplified Payment Verification (SPV) subsection, the merkle tree allows clients to verify for themselves that a transaction was included in a block by obtaining the merkle root from a block header and a list of the intermediate hashes from a full peer. The full peer does not need to be trusted: it is expensive to fake block headers and the intermediate hashes cannot be faked or the verification will fail.
For example, to verify transaction D was added to the block, an SPV client only needs a copy of the C, AB, and EEEE hashes in addition to the merkle root; the client doesn’t need to know anything about any of the other transactions. If the five transactions in this block were all at the maximum size, downloading the entire block would require over 500,000 bytes—but downloading three hashes plus the block header requires only 140 bytes.
Note: If identical txids are found within the same block, there is a possibility that the merkle tree may collide with a block with some or all duplicates removed due to how unbalanced merkle trees are implemented (duplicating the lone hash). Since it is impractical to have separate transactions with identical txids, this does not impose a burden on honest software, but must be checked if the invalid status of a block is to be cached; otherwise, a valid block with the duplicates eliminated could have the same merkle root and block hash, but be rejected by the cached invalid outcome, resulting in security bugs such as CVE-2012-2459.
Consensus Rule Changes
To maintain consensus, all full nodes validate blocks using the same consensus rules. However, sometimes the consensus rules are changed to introduce new features or prevent network abuse. When the new rules are implemented, there will likely be a period of time when non-upgraded nodes follow the old rules and upgraded nodes follow the new rules, creating two possible ways consensus can break:
A block following the new consensus rules is accepted by upgraded nodes but rejected by non-upgraded nodes. For example, a new transaction feature is used within a block: upgraded nodes understand the feature and accept it, but non-upgraded nodes reject it because it violates the old rules.
A block violating the new consensus rules is rejected by upgraded nodes but accepted by non-upgraded nodes. For example, an abusive transaction feature is used within a block: upgraded nodes reject it because it violates the new rules, but non-upgraded nodes accept it because it follows the old rules.
In the first case, rejection by non-upgraded nodes, mining software which gets block chain data from those non-upgraded nodes refuses to build on the same chain as mining software getting data from upgraded nodes. This creates permanently divergent chains—one for non-upgraded nodes and one for upgraded nodes—called a hard fork.
In the second case, rejection by upgraded nodes, it’s possible to keep the block chain from permanently diverging if upgraded nodes control a majority of the hash rate. That’s because, in this case, non-upgraded nodes will accept as valid all the same blocks as upgraded nodes, so the upgraded nodes can build a stronger chain that the non-upgraded nodes will accept as the best valid block chain. This is called a soft fork.
Although a fork is an actual divergence in block chains, changes to the consensus rules are often described by their potential to create either a hard or soft fork. For example, “increasing the block size above 1 MB requires a hard fork.” In this example, an actual block chain fork is not required—but it is a possible outcome.
Consensus rule changes may be activated in various ways. During Bitcoin’s first two years, Satoshi Nakamoto performed several soft forks by just releasing the backwards-compatible change in a client that began immediately enforcing the new rule. Multiple soft forks such as BIP30 have been activated via a flag day where the new rule began to be enforced at a preset time or block height. Such forks activated via a flag day are known as User Activated Soft Forks (UASF) as they are dependent on having sufficient users (nodes) to enforce the new rules after the flag day.
Later soft forks waited for a majority of hash rate (typically 75% or 95%) to signal their readiness for enforcing the new consensus rules. Once the signalling threshold has been passed, all nodes will begin enforcing the new rules. Such forks are known as Miner Activated Soft Forks (MASF) as they are dependent on miners for activation.
Resources: BIP16, BIP30, and BIP34 were implemented as changes which might have lead to soft forks. BIP50 describes both an accidental hard fork, resolved by temporary downgrading the capabilities of upgraded nodes, and an intentional hard fork when the temporary downgrade was removed. A document from Gavin Andresen outlines how future rule changes may be implemented.
Non-upgraded nodes may use and distribute incorrect information during both types of forks, creating several situations which could lead to financial loss. In particular, non-upgraded nodes may relay and accept transactions that are considered invalid by upgraded nodes and so will never become part of the universally-recognized best block chain. Non-upgraded nodes may also refuse to relay blocks or transactions which have already been added to the best block chain, or soon will be, and so provide incomplete information.
Bitcoin Core includes code that detects a hard fork by looking at block
chain proof of work. If a non-upgraded node receives block chain headers
demonstrating at least six blocks more proof of work than the best chain
it considers valid, the node reports a warning in the
results and runs the
-alertnotify command if set. This warns the
operator that the non-upgraded node can’t switch to what is likely the
best block chain.
Full nodes can also check block and transaction version numbers. If the
block or transaction version numbers seen in several recent blocks are
higher than the version numbers the node uses, it can assume it doesn’t
use the current consensus rules. Bitcoin Core reports this situation
getnetworkinfo RPC and
-alertnotify command if set.
SPV clients which connect to full nodes can detect a likely hard fork by connecting to several full nodes and ensuring that they’re all on the same chain with the same block height, plus or minus several blocks to account for transmission delays and stale blocks. If there’s a divergence, the client can disconnect from nodes with weaker chains.
Transactions let users spend satoshis. Each transaction is constructed out of several parts which enable both simple direct payments and complex transactions. This section will describe each part and demonstrate how to use them together to build complete transactions.
To keep things simple, this section pretends coinbase transactions do not exist. Coinbase transactions can only be created by Bitcoin miners and they’re an exception to many of the rules listed below. Instead of pointing out the coinbase exception to each rule, we invite you to read about coinbase transactions in the block chain section of this guide.
The figure above shows the main parts of a Bitcoin transaction. Each transaction has at least one input and one output. Each input spends the satoshis paid to a previous output. Each output then waits as an Unspent Transaction Output (UTXO) until a later input spends it. When your Bitcoin wallet tells you that you have a 10,000 satoshi balance, it really means that you have 10,000 satoshis waiting in one or more UTXOs.
Each transaction is prefixed by a four-byte transaction version number which tells Bitcoin peers and miners which set of rules to use to validate it. This lets developers create new rules for future transactions without invalidating previous transactions.
An output has an implied index number based on its location in the transaction—the index of the first output is zero. The output also has an amount in satoshis which it pays to a conditional pubkey script. Anyone who can satisfy the conditions of that pubkey script can spend up to the amount of satoshis paid to it.
An input uses a transaction identifier (txid) and an output index number (often called “vout” for output vector) to identify a particular output to be spent. It also has a signature script which allows it to provide data parameters that satisfy the conditionals in the pubkey script. (The sequence number and locktime are related and will be covered together in a later subsection.)
The figures below help illustrate how these features are used by showing the workflow Alice uses to send Bob a transaction and which Bob later uses to spend that transaction. Both Alice and Bob will use the most common form of the standard Pay-To-Public-Key-Hash (P2PKH) transaction type. P2PKH lets Alice spend satoshis to a typical Bitcoin address, and then lets Bob further spend those satoshis using a simple cryptographic key pair.
Bob must first generate a private/public key pair before Alice can create the first transaction. Bitcoin uses the Elliptic Curve Digital Signature Algorithm (ECDSA) with the secp256k1 curve; secp256k1 private keys are 256 bits of random data. A copy of that data is deterministically transformed into an secp256k1 public key. Because the transformation can be reliably repeated later, the public key does not need to be stored.
The public key (pubkey) is then cryptographically hashed. This pubkey hash can also be reliably repeated later, so it also does not need to be stored. The hash shortens and obfuscates the public key, making manual transcription easier and providing security against unanticipated problems which might allow reconstruction of private keys from public key data at some later point.
Bob provides the pubkey hash to Alice. Pubkey hashes are almost always
sent encoded as Bitcoin addresses, which are base58-encoded strings
containing an address version number, the hash, and an error-detection
checksum to catch typos. The address can be transmitted
through any medium, including one-way mediums which prevent the spender
from communicating with the receiver, and it can be further encoded
into another format, such as a QR code containing a
Once Alice has the address and decodes it back into a standard hash, she can create the first transaction. She creates a standard P2PKH transaction output containing instructions which allow anyone to spend that output if they can prove they control the private key corresponding to Bob’s hashed public key. These instructions are called the pubkey script or scriptPubKey.
When, some time later, Bob decides to spend the UTXO, he must create an input which references the transaction Alice created by its hash, called a Transaction Identifier (txid), and the specific output she used by its index number (output index). He must then create a signature script—a collection of data parameters which satisfy the conditions Alice placed in the previous output’s pubkey script. Signature scripts are also called scriptSigs.
An secp256k1 signature made by using the ECDSA cryptographic formula to combine certain transaction data (described below) with Bob’s private key. This lets the pubkey script verify that Bob owns the private key which created the public key.
Bob’s secp256k1 signature doesn’t just prove Bob controls his private key; it also makes the non-signature-script parts of his transaction tamper-proof so Bob can safely broadcast them over the peer-to-peer network.
As illustrated in the figure above, the data Bob signs includes the txid and output index of the previous transaction, the previous output’s pubkey script, the pubkey script Bob creates which will let the next recipient spend this transaction’s output, and the amount of satoshis to spend to the next recipient. In essence, the entire transaction is signed except for any signature scripts, which hold the full public keys and secp256k1 signatures.
After putting his signature and public key in the signature script, Bob broadcasts the transaction to Bitcoin miners through the peer-to-peer network. Each peer and miner independently validates the transaction before broadcasting it further or attempting to include it in a new block of transactions.
P2PKH Script Validation
OP_DUP OP_HASH160 <PubkeyHash> OP_EQUALVERIFY OP_CHECKSIG
The spender’s signature script is evaluated and prefixed to the beginning of the script. In a P2PKH transaction, the signature script contains an secp256k1 signature (sig) and full public key (pubkey), creating the following concatenation:
<Sig> <PubKey> OP_DUP OP_HASH160 <PubkeyHash> OP_EQUALVERIFY OP_CHECKSIG
The script language is a Forth-like stack-based language deliberately designed to be stateless and not Turing complete. Statelessness ensures that once a transaction is added to the block chain, there is no condition which renders it permanently unspendable. Turing-incompleteness (specifically, a lack of loops or gotos) makes the script language less flexible and more predictable, greatly simplifying the security model.
To test whether the transaction is valid, signature script and pubkey script operations are executed one item at a time, starting with Bob’s signature script and continuing to the end of Alice’s pubkey script. The figure below shows the evaluation of a standard P2PKH pubkey script; below the figure is a description of the process.
The signature (from Bob’s signature script) is added (pushed) to an empty stack. Because it’s just data, nothing is done except adding it to the stack. The public key (also from the signature script) is pushed on top of the signature.
OP_EQUAL(not shown) checks the two values at the top of the stack; in this case, it checks whether the pubkey hash generated from the full public key Bob provided equals the pubkey hash Alice provided when she created transaction #1.
OP_EQUALpops (removes from the top of the stack) the two values it compared, and replaces them with the result of that comparison: zero (false) or one (true).
OP_VERIFY(not shown) checks the value at the top of the stack. If the value is false it immediately terminates evaluation and the transaction validation fails. Otherwise it pops the true value off the stack.
Finally, Alice’s pubkey script executes
OP_CHECKSIG, which checks the signature Bob provided against the now-authenticated public key he also provided. If the signature matches the public key and was generated using all of the data required to be signed,
OP_CHECKSIGpushes the value true onto the top of the stack.
If false is not at the top of the stack after the pubkey script has been evaluated, the transaction is valid (provided there are no other problems with it).
Pubkey scripts are created by spenders who have little interest what that script does. Receivers do care about the script conditions and, if they want, they can ask spenders to use a particular pubkey script. Unfortunately, custom pubkey scripts are less convenient than short Bitcoin addresses and there was no standard way to communicate them between programs prior to widespread implementation of the now deprecated BIP70 Payment Protocol discussed later.
The basic P2SH workflow, illustrated below, looks almost identical to the P2PKH workflow. Bob creates a redeem script with whatever script he wants, hashes the redeem script, and provides the redeem script hash to Alice. Alice creates a P2SH-style output containing Bob’s redeem script hash.
When Bob wants to spend the output, he provides his signature along with the full (serialized) redeem script in the signature script. The peer-to-peer network ensures the full redeem script hashes to the same value as the script hash Alice put in her output; it then processes the redeem script exactly as it would if it were the primary pubkey script, letting Bob spend the output if the redeem script does not return false.
The hash of the redeem script has the same properties as a pubkey hash—so it can be transformed into the standard Bitcoin address format with only one small change to differentiate it from a standard address. This makes collecting a P2SH-style address as simple as collecting a P2PKH-style address. The hash also obfuscates any public keys in the redeem script, so P2SH scripts are as secure as P2PKH pubkey hashes.
After the discovery of several dangerous bugs in early versions of
Bitcoin, a test was added which only accepted transactions from the
network if their pubkey scripts and signature scripts matched a small set of
believed-to-be-safe templates, and if the rest of the transaction didn’t
violate another small set of rules enforcing good network behavior. This
IsStandard() test, and transactions which pass it are called
Non-standard transactions—those that fail the test—may be accepted by nodes not using the default Bitcoin Core settings. If they are included in blocks, they will also avoid the IsStandard test and be processed.
Besides making it more difficult for someone to attack Bitcoin for free by broadcasting harmful transactions, the standard transaction test also helps prevent users from creating transactions today that would make adding new transaction features in the future more difficult. For example, as described above, each transaction includes a version number—if users started arbitrarily changing the version number, it would become useless as a tool for introducing backwards-incompatible features.
As of Bitcoin Core 0.9, the standard pubkey script types are:
Pay To Public Key Hash (P2PKH)
Pubkey script: OP_DUP OP_HASH160 <PubKeyHash> OP_EQUALVERIFY OP_CHECKSIG Signature script: <sig> <pubkey>
Pay To Script Hash (P2SH)
P2SH is used to send a transaction to a script hash. Each of the standard pubkey scripts can be used as a P2SH redeem script, excluding P2SH itself. As of Bitcoin Core 0.9.2, P2SH transactions can contain any valid redeemScript, making the P2SH standard much more flexible and allowing for experimentation with many novel and complex types of transactions. The most common use of P2SH is the standard multisig pubkey script, with the second most common use being the Open Assets Protocol.
Another common redeemScript used for P2SH is storing textual data on the blockchain. The first bitcoin transaction ever made included text, and P2SH is a convenient method of storing text on the blockchain as its possible to store up to 1.5kb of text data. An example of storing text on the blockchain using P2SH can be found in this repository.
Pubkey script: OP_HASH160 <Hash160(redeemScript)> OP_EQUAL Signature script: <sig> [sig] [sig...] <redeemScript>
This script combination looks perfectly fine to old nodes as long as the script hash matches the redeem script. However, after the soft fork is activated, new nodes will perform a further verification for the redeem script. They will extract the redeem script from the signature script, decode it, and execute it with the remaining stack items(<sig> [sig] [sig..]part). Therefore, to redeem a P2SH transaction, the spender must provide the valid signature or answer in addition to the correct redeem script.
This last step is similar to the verification step in P2PKH or P2Multisig scripts, where the initial part of the signature script(<sig> [sig] [sig..]) acts as the “signature script” in P2PKH/P2Multisig, and the redeem script acts as the “pubkey script”.
In multisig pubkey scripts, called m-of-n, m is the minimum number of signatures
which must match a public key; n is the number of public keys being
provided. Both m and n should be opcodes
corresponding to the number desired.
Because of an off-by-one error in the original Bitcoin implementation
which must be preserved for compatibility,
consumes one more value from the stack than indicated by m, so the
list of secp256k1 signatures in the signature script must be prefaced with an extra value
OP_0) which will be consumed but not used.
Pubkey script: <m> <A pubkey> [B pubkey] [C pubkey...] <n> OP_CHECKMULTISIG Signature script: OP_0 <A sig> [B sig] [C sig...]
Although it’s not a separate transaction type, this is a P2SH multisig with 2-of-3:
Pubkey script: OP_HASH160 <Hash160(redeemScript)> OP_EQUAL Redeem script: <OP_2> <A pubkey> <B pubkey> <C pubkey> <OP_3> OP_CHECKMULTISIG Signature script: OP_0 <A sig> <C sig> <redeemScript>
Pubkey script: <pubkey> OP_CHECKSIG Signature script: <sig>
Null data transaction type relayed and mined by default in Bitcoin Core 0.9.0 and later that adds arbitrary data to a provably unspendable pubkey script that full nodes don’t have to store in their UTXO database. It is preferable to use null data transactions over transactions that bloat the UTXO database because they cannot be automatically pruned; however, it is usually even more preferable to store data outside transactions if possible.
Consensus rules allow null data outputs up to the maximum allowed pubkey script size of 10,000 bytes provided they follow all other consensus rules, such as not having any data pushes larger than 520 bytes.
Pubkey Script: OP_RETURN <0 to 40 bytes of data> (Null data scripts cannot be spent, so there's no signature script.)
Bitcoin Core 0.11.x increases this default to 80 bytes, with the other rules remaining the same.
Bitcoin Core 0.12.0 defaults to relaying and mining null data outputs with up to 83 bytes with any number of data pushes, provided the total byte limit is not exceeded. There must still only be a single null data output and it must still pay exactly 0 satoshis.
-datacarriersize Bitcoin Core configuration option allows you to
set the maximum number of bytes in null data outputs that you will relay
If you use anything besides a standard pubkey script in an output, peers and miners using the default Bitcoin Core settings will neither accept, broadcast, nor mine your transaction. When you try to broadcast your transaction to a peer running the default settings, you will receive an error.
If you create a redeem script, hash it, and use the hash in a P2SH output, the network sees only the hash, so it will accept the output as valid no matter what the redeem script says. This allows payment to non-standard scripts, and as of Bitcoin Core 0.11, almost all valid redeem scripts can be spent. The exception is scripts that use unassigned NOP opcodes; these opcodes are reserved for future soft forks and can only be relayed or mined by nodes that don’t follow the standard mempool policy.
Note: standard transactions are designed to protect and help the network, not prevent you from making mistakes. It’s easy to create standard transactions which make the satoshis sent to them unspendable.
The transaction must not include any outputs which receive fewer than 1/3 as many satoshis as it would take to spend it in a typical input. That’s currently 546 satoshis for a P2PKH or P2SH output on a Bitcoin Core node with the default relay fee. Exception: standard null data outputs must receive zero satoshis.
Signature Hash Types
OP_CHECKSIG extracts a non-stack argument from each signature it
evaluates, allowing the signer to decide which parts of the transaction
to sign. Since the signature protects those parts of the transaction
from modification, this lets signers selectively choose to let other
people modify their transactions.
SIGHASH_SINGLEthe only output signed is the one corresponding to this input (the output with the same output index number as this input), ensuring nobody can change your part of the transaction but allowing other signers to change their part of the transaction. The corresponding output must exist or the value “1” will be signed, breaking the security scheme. This input, as well as other inputs, are included in the signature. The sequence numbers of other inputs are not included in the signature, and can be updated.
The base types can be modified with the
SIGHASH_ANYONECANPAY (anyone can
pay) flag, creating three new combined types:
SIGHASH_ALL|SIGHASH_ANYONECANPAYsigns all of the outputs but only this one input, and it also allows anyone to add or remove other inputs, so anyone can contribute additional satoshis but they cannot change how many satoshis are sent nor where they go.
Because each input is signed, a transaction with multiple inputs can
have multiple signature hash types signing different parts of the transaction. For
example, a single-input transaction signed with
NONE could have its
output changed by the miner who adds it to the block chain. On the other
hand, if a two-input transaction has one input signed with
one input signed with
ALL signer can choose where to spend
the satoshis without consulting the
NONE signer—but nobody else can
modify the transaction.
Locktime And Sequence Number
One thing all signature hash types sign is the transaction’s locktime. (Called nLockTime in the Bitcoin Core source code.) The locktime indicates the earliest time a transaction can be added to the block chain.
Locktime allows signers to create time-locked transactions which will only become valid in the future, giving the signers a chance to change their minds.
If any of the signers change their mind, they can create a new non-locktime transaction. The new transaction will use, as one of its inputs, one of the same outputs which was used as an input to the locktime transaction. This makes the locktime transaction invalid if the new transaction is added to the block chain before the time lock expires.
Care must be taken near the expiry time of a time lock. The peer-to-peer network allows block time to be up to two hours ahead of real time, so a locktime transaction can be added to the block chain up to two hours before its time lock officially expires. Also, blocks are not created at guaranteed intervals, so any attempt to cancel a valuable transaction should be made a few hours before the time lock expires.
Previous versions of Bitcoin Core provided a feature which prevented transaction signers from using the method described above to cancel a time-locked transaction, but a necessary part of this feature was disabled to prevent denial of service attacks. A legacy of this system are four-byte sequence numbers in every input. Sequence numbers were meant to allow multiple signers to agree to update a transaction; when they finished updating the transaction, they could agree to set every input’s sequence number to the four-byte unsigned maximum (0xffffffff), allowing the transaction to be added to a block even if its time lock had not expired.
Even today, setting all sequence numbers to 0xffffffff (the default in Bitcoin Core) can still disable the time lock, so if you want to use locktime, at least one input must have a sequence number below the maximum. Since sequence numbers are not used by the network for any other purpose, setting any sequence number to zero is sufficient to enable locktime.
Locktime itself is an unsigned 4-byte integer which can be parsed two ways:
If greater than or equal to 500 million, locktime is parsed using the Unix epoch time format (the number of seconds elapsed since 1970-01-01T00:00 UTC—currently over 1.395 billion). The transaction can be added to any block whose block time is greater than the locktime.
Transaction Fees And Change
Transactions pay fees based on the total byte size of the signed transaction. Fees per byte are calculated based on current demand for space in mined blocks with fees rising as demand increases. The transaction fee is given to the Bitcoin miner, as explained in the block chain section, and so it is ultimately up to each miner to choose the minimum transaction fee they will accept.
In the past, these “priority” transaction were often exempt from the normal fee requirements. Before Bitcoin Core 0.12, 50 KB of each block would be reserved for these high-priority transactions, however this is now set to 0 KB by default. After the priority area, all transactions are prioritized based on their fee per byte, with higher-paying transactions being added in sequence until all of the available space is filled.
As of Bitcoin Core 0.9, a minimum fee (currently 1,000 satoshis) has been required to broadcast a transaction across the network. Any transaction paying only the minimum fee should be prepared to wait a long time before there’s enough spare space in a block to include it. Please see the verifying payment section for why this could be important.
Since each transaction spends Unspent Transaction Outputs (UTXOs) and because a UTXO can only be spent once, the full value of the included UTXOs must be spent or given to a miner as a transaction fee. Few people will have UTXOs that exactly match the amount they want to pay, so most transactions include a change output.
Change outputs are regular outputs which spend the surplus satoshis from the UTXOs back to the spender. They can reuse the same P2PKH pubkey hash or P2SH script hash as was used in the UTXO, but for the reasons described in the next subsection, it is highly recommended that change outputs be sent to a new P2PKH or P2SH address.
Avoiding Key Reuse
In a transaction, the spender and receiver each reveal to each other all public keys or addresses used in the transaction. This allows either person to use the public block chain to track past and future transactions involving the other person’s same public keys or addresses.
If the same public key is reused often, as happens when people use Bitcoin addresses (hashed public keys) as static payment addresses, other people can easily track the receiving and spending habits of that person, including how many satoshis they control in known addresses.
It doesn’t have to be that way. If each public key is used exactly twice—once to receive a payment and once to spend that payment—the user can gain a significant amount of financial privacy.
Even better, using new public keys or unique addresses when accepting payments or creating change outputs can be combined with other techniques discussed later, such as CoinJoin or merge avoidance, to make it extremely difficult to use the block chain by itself to reliably track how users receive and spend their satoshis.
Avoiding key reuse can also provide security against attacks which might allow reconstruction of private keys from public keys (hypothesized) or from signature comparisons (possible today under certain circumstances described below, with more general attacks hypothesized).
Unique (non-reused) P2PKH and P2SH addresses protect against the first type of attack by keeping ECDSA public keys hidden (hashed) until the first time satoshis sent to those addresses are spent, so attacks are effectively useless unless they can reconstruct private keys in less than the hour or two it takes for a transaction to be well protected by the block chain.
Unique (non-reused) private keys protect against the second type of attack by only generating one signature per private key, so attackers never get a subsequent signature to use in comparison-based attacks. Existing comparison-based attacks are only practical today when insufficient entropy is used in signing or when the entropy used is exposed by some means, such as a side-channel attack.
So, for both privacy and security, we encourage you to build your
applications to avoid public key reuse and, when possible, to discourage
users from reusing addresses. If your application needs to provide a
fixed URI to which payments should be sent, please see the
bitcoin: URI section below.
None of Bitcoin’s signature hash types protect the signature script, leaving the door open for a limited denial of service attack called transaction malleability. The signature script contains the secp256k1 signature, which can’t sign itself, allowing attackers to make non-functional modifications to a transaction without rendering it invalid. For example, an attacker can add some data to the signature script which will be dropped before the previous pubkey script is processed.
Although the modifications are non-functional—so they do not change what inputs the transaction uses nor what outputs it pays—they do change the computed hash of the transaction. Since each transaction links to previous transactions using hashes as a transaction identifier (txid), a modified transaction will not have the txid its creator expected.
This isn’t a problem for most Bitcoin transactions which are designed to be added to the block chain immediately. But it does become a problem when the output from a transaction is spent before that transaction is added to the block chain.
Bitcoin developers have been working to reduce transaction malleability among standard transaction types, one outcome of those efforts is BIP 141: Segregated Witness, which is supported by Bitcoin Core and was activated in August 2017. When SegWit is not being used, new transactions should not depend on previous transactions which have not been added to the block chain yet, especially if large amounts of satoshis are at stake.
Transaction malleability also affects payment tracking. Bitcoin Core’s RPC interface lets you track transactions by their txid—but if that txid changes because the transaction was modified, it may appear that the transaction has disappeared from the network.
Current best practices for transaction tracking dictate that a transaction should be tracked by the transaction outputs (UTXOs) it spends as inputs, as they cannot be changed without invalidating the transaction.
Best practices further dictate that if a transaction does seem to disappear from the network and needs to be reissued, that it be reissued in a way that invalidates the lost transaction. One method which will always work is to ensure the reissued payment spends all of the same outputs that the lost transaction used as inputs.
Contracts are transactions which use the decentralized Bitcoin system to enforce financial agreements. Bitcoin contracts can often be crafted to minimize dependency on outside agents, such as the court system, which significantly decreases the risk of dealing with unknown entities in financial transactions.
The following subsections will describe a variety of Bitcoin contracts already in use. Because contracts deal with real people, not just transactions, they are framed below in story format.
Besides the contract types described below, many other contract types have been proposed. Several of them are collected on the Contracts page of the Bitcoin Wiki.
Escrow And Arbitration
Charlie-the-customer wants to buy a product from Bob-the-businessman, but neither of them trusts the other person, so they use a contract to help ensure Charlie gets his merchandise and Bob gets his payment.
A simple contract could say that Charlie will spend satoshis to an output which can only be spent if Charlie and Bob both sign the input spending it. That means Bob won’t get paid unless Charlie gets his merchandise, but Charlie can’t get the merchandise and keep his payment.
This simple contract isn’t much help if there’s a dispute, so Bob and Charlie enlist the help of Alice-the-arbitrator to create an escrow contract. Charlie spends his satoshis to an output which can only be spent if two of the three people sign the input. Now Charlie can pay Bob if everything is ok, Bob can refund Charlie’s money if there’s a problem, or Alice can arbitrate and decide who should get the satoshis if there’s a dispute.
OP_2 [A's pubkey] [B's pubkey] [C's pubkey] OP_3 OP_CHECKMULTISIG
OP_3 push the actual numbers 2 and 3 onto the
specifies that 2 signatures are required to sign;
OP_3 specifies that
3 public keys (unhashed) are being provided. This is a 2-of-3 multisig
pubkey script, more generically called a m-of-n pubkey script (where m is the
minimum matching signatures required and n in the number of public
Bob gives the redeem script to Charlie, who checks to make sure his public key and Alice’s public key are included. Then he hashes the redeem script to create a P2SH redeem script and pays the satoshis to it. Bob sees the payment get added to the block chain and ships the merchandise.
Unfortunately, the merchandise gets slightly damaged in transit. Charlie wants a full refund, but Bob thinks a 10% refund is sufficient. They turn to Alice to resolve the issue. Alice asks for photo evidence from Charlie along with a copy of the redeem script Bob created and Charlie checked.
After looking at the evidence, Alice thinks a 40% refund is sufficient, so she creates and signs a transaction with two outputs, one that spends 60% of the satoshis to Bob’s public key and one that spends the remaining 40% to Charlie’s public key.
In the signature script Alice puts her signature and a copy of the unhashed serialized redeem script that Bob created. She gives a copy of the incomplete transaction to both Bob and Charlie. Either one of them can complete it by adding his signature to create the following signature script:
OP_0 [A's signature] [B's or C's signature] [serialized redeem script]
(Opcodes to push the signatures and redeem script onto the stack are
OP_0 is a workaround for an off-by-one error in the original
implementation which must be preserved for compatibility. Note that
the signature script must provide signatures in the same order as the
corresponding public keys appear in the redeem script. See the description in
OP_CHECKMULTISIG for details.)
When the transaction is broadcast to the network, each peer checks the signature script against the P2SH output Charlie previously paid, ensuring that the redeem script matches the redeem script hash previously provided. Then the redeem script is evaluated, with the two signatures being used as input data. Assuming the redeem script validates, the two transaction outputs show up in Bob’s and Charlie’s wallets as spendable balances.
However, if Alice created and signed a transaction neither of them would agree to, such as spending all the satoshis to herself, Bob and Charlie can find a new arbitrator and sign a transaction spending the satoshis to another 2-of-3 multisig redeem script hash, this one including a public key from that second arbitrator. This means that Bob and Charlie never need to worry about their arbitrator stealing their money.
Alice also works part time moderating forum posts for Bob. Every time someone posts to Bob’s busy forum, Alice skims the post to make sure it isn’t offensive or spam. Alas, Bob often forgets to pay her, so Alice demands to be paid immediately after each post she approves or rejects. Bob says he can’t do that because hundreds of small payments will cost him thousands of satoshis in transaction fees, so Alice suggests they use a micropayment channel.
Bob asks Alice for her public key and then creates two transactions. The first transaction pays 100 millibitcoins to a P2SH output whose 2-of-2 multisig redeem script requires signatures from both Alice and Bob. This is the bond transaction. Broadcasting this transaction would let Alice hold the millibitcoins hostage, so Bob keeps this transaction private for now and creates a second transaction.
The second transaction spends all of the first transaction’s millibitcoins (minus a transaction fee) back to Bob after a 24 hour delay enforced by locktime. This is the refund transaction. Bob can’t sign the refund transaction by himself, so he gives it to Alice to sign, as shown in the illustration below.
Alice checks that the refund transaction’s locktime is 24 hours in the future, signs it, and gives a copy of it back to Bob. She then asks Bob for the bond transaction and checks that the refund transaction spends the output of the bond transaction. She can now broadcast the bond transaction to the network to ensure Bob has to wait for the time lock to expire before further spending his millibitcoins. Bob hasn’t actually spent anything so far, except possibly a small transaction fee, and he’ll be able to broadcast the refund transaction in 24 hours for a full refund.
Now, when Alice does some work worth 1 millibitcoin, she asks Bob to create and sign a new version of the refund transaction. Version two of the transaction spends 1 millibitcoin to Alice and the other 99 back to Bob; it does not have a locktime, so Alice can sign it and spend it whenever she wants. (But she doesn’t do that immediately.)
Alice and Bob repeat these work-and-pay steps until Alice finishes for the day, or until the time lock is about to expire. Alice signs the final version of the refund transaction and broadcasts it, paying herself and refunding any remaining balance to Bob. The next day, when Alice starts work, they create a new micropayment channel.
If Alice fails to broadcast a version of the refund transaction before its time lock expires, Bob can broadcast the first version and receive a full refund. This is one reason micropayment channels are best suited to small payments—if Alice’s Internet service goes out for a few hours near the time lock expiry, she could be cheated out of her payment.
Transaction malleability, discussed above in the Transactions section, is another reason to limit the value of micropayment channels. If someone uses transaction malleability to break the link between the two transactions, Alice could hold Bob’s 100 millibitcoins hostage even if she hadn’t done any work.
For larger payments, Bitcoin transaction fees are very low as a percentage of the total transaction value, so it makes more sense to protect payments with immediately-broadcast separate transactions.
Alice is concerned about her privacy. She knows every transaction gets added to the public block chain, so when Bob and Charlie pay her, they can each easily track those satoshis to learn what Bitcoin addresses she pays, how much she pays them, and possibly how many satoshis she has left.
Alice isn’t a criminal, she just wants plausible deniability about where she has spent her satoshis and how many she has left, so she starts up the Tor anonymity service on her computer and logs into an IRC chatroom as “AnonGirl.”
Also in the chatroom are “Nemo” and “Neminem.” They collectively agree to transfer satoshis between each other so no one besides them can reliably determine who controls which satoshis. But they’re faced with a dilemma: who transfers their satoshis to one of the other two pseudonymous persons first? The CoinJoin-style contract, shown in the illustration below, makes this decision easy: they create a single transaction which does all of the spending simultaneously, ensuring none of them can steal the others’ satoshis.
Each contributor looks through their collection of Unspent Transaction Outputs (UTXOs) for 100 millibitcoins they can spend. They then each generate a brand new public key and give UTXO details and pubkey hashes to the facilitator. In this case, the facilitator is AnonGirl; she creates a transaction spending each of the UTXOs to three equally-sized outputs. One output goes to each of the contributors’ pubkey hashes.
AnonGirl then signs her inputs using
SIGHASH_ALL to ensure nobody can
change the input or output details. She gives the partially-signed
transaction to Nemo who signs his inputs the same way and passes it
to Neminem, who also signs it the same way. Neminem then broadcasts
the transaction to the Bitcoin peer-to-peer network, mixing all of the millibitcoins in
a single transaction.
As you can see in the illustration, there’s no way for anyone besides AnonGirl, Nemo, and Neminem to confidently determine who received which output, so they can each spend their output with plausible deniability.
Now when Bob or Charlie try to track Alice’s transactions through the block chain, they’ll also see transactions made by Nemo and Neminem. If Alice does a few more CoinJoins, Bob and Charlie might have to guess which transactions made by dozens or hundreds of people were actually made by Alice.
The complete history of Alice’s satoshis is still in the block chain, so a determined investigator could talk to the people AnonGirl CoinJoined with to find out the ultimate origin of her satoshis and possibly reveal AnonGirl as Alice. But against anyone casually browsing block chain history, Alice gains plausible deniability.
The CoinJoin technique described above costs the participants a small amount of satoshis to pay the transaction fee. An alternative technique, purchaser CoinJoin, can actually save them satoshis and improve their privacy at the same time.
AnonGirl waits in the IRC chatroom until she wants to make a purchase. She announces her intention to spend satoshis and waits until someone else wants to make a purchase, likely from a different merchant. Then they combine their inputs the same way as before but set the outputs to the separate merchant addresses so nobody will be able to figure out solely from block chain history which one of them bought what from the merchants.
Since they would’ve had to pay a transaction fee to make their purchases anyway, AnonGirl and her co-spenders don’t pay anything extra—but because they reduced overhead by combining multiple transactions, saving bytes, they may be able to pay a smaller aggregate transaction fee, saving each one of them a tiny amount of satoshis.
JoinMarket style CoinJoins differ from the above described scheme by splitting the participants into two sections: market makers and market takers. Market makers are publishing their CoinJoin intentions to an IRC room and waiting for market takers to take their offers. When a taker comes along, it selects a set of makers and creates a shared transaction with them, while also paying a small fee. Unlike the above described scheme, this happens automatically.
Wasabi Wallet style CoinJoins are called Chaumian CoinJoins. It employs a CoinJoin coordinator, where various peers can register. When the pre-defined number of participants registered, a CoinJoin-round kicks in. In this scheme Chaumian Blind Signatures are utilized to prevent the coordinator and the peers from learning which outputs correspond to which inputs. An example for Chaumian CoinJoin is the following transaction: 8fee07b90f26e85e22e87da13e1618cd9eeaf98f3f3774273c9307cd40ff98e8
A Bitcoin wallet can refer to either a wallet program or a wallet file. Wallet programs create public keys to receive satoshis and use the corresponding private keys to spend those satoshis. Wallet files store private keys and (optionally) other information related to transactions for the wallet program.
Permitting receiving and spending of satoshis is the only essential feature of wallet software—but a particular wallet program doesn’t need to do both things. Two wallet programs can work together, one program distributing public keys in order to receive satoshis and another program signing transactions spending those satoshis.
Wallet programs also need to interact with the peer-to-peer network to get information from the block chain and to broadcast new transactions. However, the programs which distribute public keys or sign transactions don’t need to interact with the peer-to-peer network themselves.
This leaves us with three necessary, but separable, parts of a wallet system: a public key distribution program, a signing program, and a networked program. In the subsections below, we will describe common combinations of these parts.
Note: we speak about distributing public keys generically. In many cases, P2PKH or P2SH hashes will be distributed instead of public keys, with the actual public keys only being distributed when the outputs they control are spent.
The simplest wallet is a program which performs all three functions: it generates private keys, derives the corresponding public keys, helps distribute those public keys as necessary, monitors for outputs spent to those public keys, creates and signs transactions spending those outputs, and broadcasts the signed transactions.
The main disadvantage of full-service wallets is that they store the private keys on a device connected to the Internet. The compromise of such devices is a common occurrence, and an Internet connection makes it easy to transmit private keys from a compromised device to an attacker.
To help protect against theft, many wallet programs offer users the option of encrypting the wallet files which contain the private keys. This protects the private keys when they aren’t being used, but it cannot protect against an attack designed to capture the encryption key or to read the decrypted keys from memory.
To increase security, private keys can be generated and stored by a separate wallet program operating in a more secure environment. These signing-only wallets work in conjunction with a networked wallet which interacts with the peer-to-peer network.
The networked wallet uses the parent public key to derive child public keys, optionally helps distribute them, monitors for outputs spent to those public keys, creates unsigned transactions spending those outputs, and transfers the unsigned transactions to the signing-only wallet.
After the optional review step, the signing-only wallet uses the parent private key to derive the appropriate child private keys and signs the transactions, giving the signed transactions back to the networked wallet.
Several full-service wallets programs will also operate as two separate wallets: one program instance acting as a signing-only wallet (often called an “offline wallet”) and the other program instance acting as the networked wallet (often called an “online wallet” or “watching-only wallet”).
The offline wallet is so named because it is intended to be run on a device which does not connect to any network, greatly reducing the number of attack vectors. If this is the case, it is usually up to the user to handle all data transfer using removable media such as USB drives. The user’s workflow is something like:
(Offline) Disable all network connections on a device and install the wallet software. Start the wallet software in offline mode to create the parent private and public keys. Copy the parent public key to removable media.
(Online) Install the wallet software on another device, this one connected to the Internet, and import the parent public key from the removable media. As you would with a full-service wallet, distribute public keys to receive payment. When ready to spend satoshis, fill in the output details and save the unsigned transaction generated by the wallet to removable media.
(Offline) Open the unsigned transaction in the offline instance, review the output details to make sure they spend the correct amount to the correct address. This prevents malware on the online wallet from tricking the user into signing a transaction which pays an attacker. After review, sign the transaction and save it to removable media.
(Online) Open the signed transaction in the online instance so it can broadcast it to the peer-to-peer network.
The primary advantage of offline wallets is their possibility for greatly improved security over full-service wallets. As long as the offline wallet is not compromised (or flawed) and the user reviews all outgoing transactions before signing, the user’s satoshis are safe even if the online wallet is compromised.
The primary disadvantage of offline wallets is hassle. For maximum security, they require the user dedicate a device to only offline tasks. The offline device must be booted up whenever funds are to be spent, and the user must physically copy data from the online device to the offline device and back.
Hardware wallets are devices dedicated to running a signing-only wallet. Their dedication lets them eliminate many of the vulnerabilities present in operating systems designed for general use, allowing them to safely communicate directly with other devices so users don’t need to transfer data manually. The user’s workflow is something like:
(Networked) As you would with a full-service wallet, distribute public keys to receive payment. When ready to spend satoshis, fill in the transaction details, connect the hardware wallet, and click Spend. The networked wallet will automatically send the transaction details to the hardware wallet.
(Hardware) Review the transaction details on the hardware wallet’s screen. Some hardware wallets may prompt for a passphrase or PIN number. The hardware wallet signs the transaction and uploads it to the networked wallet.
The primary disadvantage of hardware wallets is their hassle. Even though the hassle is less than that of offline wallets, the user must still purchase a hardware wallet device and carry it with them whenever they need to make a transaction using the signing-only wallet.
An additional (hopefully temporary) disadvantage is that, as of this writing, very few popular wallet programs support hardware wallets—although almost all popular wallet programs have announced their intention to support at least one model of hardware wallet.
Wallet programs which run in difficult-to-secure environments, such as webservers, can be designed to distribute public keys (including P2PKH or P2SH addresses) and nothing more. There are two common ways to design these minimalist wallets:
Pre-populate a database with a number of public keys or addresses, and then distribute on request a pubkey script or address using one of the database entries. To avoid key reuse, webservers should keep track of used keys and never run out of public keys. This can be made easier by using parent public keys as suggested in the next method.
Use a parent public key to create child public keys. To avoid key reuse, a method must be used to ensure the same public key isn’t distributed twice. This can be a database entry for each key distributed or an incrementing pointer to the key index number.
Neither method adds a significant amount of overhead, especially if a database is used anyway to associate each incoming payment with a separate public key for payment tracking. See the Payment Processing section for details.
Private Key Formats
0x01 and 0xFFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFE BAAE DCE6 AF48 A03B BFD2 5E8C D036 4140, representing nearly the entire range of 2256-1 values. The range is governed by the secp256k1 ECDSA encryption standard used by Bitcoin.
Wallet Import Format (WIF)
In order to make copying of private keys less prone to error, Wallet Import Format may be utilized. WIF uses base58Check encoding on an private key, greatly decreasing the chance of copying error, much like standard Bitcoin addresses.
Take a private key.
Perform a SHA-256 hash on the extended key.
Perform a SHA-256 hash on result of SHA-256 hash.
Take the first four bytes of the second SHA-256 hash; this is the checksum.
Add the four checksum bytes from point 5 at the end of the extended key from point 2.
The process is easily reversible, using the Base58 decoding function, and removing the padding.
Mini Private Key Format
Mini private key format is a method for encoding a private key in under 30 characters, enabling keys to be embedded in a small physical space, such as physical bitcoin tokens, and more damage-resistant QR codes.
The first character of mini keys is ‘S’.
The SHA256 hash is calculated. If the first byte produced is a `00’, it is well-formatted. This key restriction acts as a typo-checking mechanism. A user brute forces the process using random numbers until a well-formatted mini private key is produced.
In order to derive the full private key, the user simply takes a single SHA256 hash of the original mini private key. This process is one-way: it is intractable to compute the mini private key format from the derived key.
Many implementations disallow the character ‘1’ in the mini private key due to its visual similarity to ‘l’.
Resource: A common tool to create and redeem these keys is the Casascius Bitcoin Address Utility.
Public Key Formats
Bitcoin ECDSA public keys represent a point on a particular Elliptic Curve (EC) defined in secp256k1. In their traditional uncompressed form, public keys contain an identification byte, a 32-byte X coordinate, and a 32-byte Y coordinate. The extremely simplified illustration below shows such a point on the elliptic curve used by Bitcoin, y2 = x3 + 7, over a field of contiguous numbers.
(Secp256k1 actually modulos coordinates by a large prime, which produces a field of non-contiguous integers and a significantly less clear plot, although the principles are the same.)
An almost 50% reduction in public key size can be realized without changing any fundamentals by dropping the Y coordinate. This is possible because only two points along the curve share any particular X coordinate, so the 32-byte Y coordinate can be replaced with a single bit indicating whether the point is on what appears in the illustration as the “top” side or the “bottom” side.
No data is lost by creating these compressed public keys—only a small amount of CPU is necessary to reconstruct the Y coordinate and access the uncompressed public key. Both uncompressed and compressed public keys are described in official secp256k1 documentation and supported by default in the widely-used OpenSSL library.
Because they’re easy to use, and because they reduce almost by half the block chain space used to store public keys for every spent output, compressed public keys are the default in Bitcoin Core and are the recommended default for all Bitcoin software.
However, Bitcoin Core prior to 0.6 used uncompressed keys. This creates a few complications, as the hashed form of an uncompressed key is different than the hashed form of a compressed key, so the same key works with two different P2PKH addresses. This also means that the key must be submitted in the correct format in the signature script so it matches the hash in the previous output’s pubkey script.
For this reason, Bitcoin Core uses several different identifier bytes to help programs identify how keys should be used:
Uncompressed public keys start with 0x04; compressed public keys begin with 0x03 or 0x02 depending on whether they’re greater or less than the midpoint of the curve. These prefix bytes are all used in official secp256k1 documentation.
Hierarchical Deterministic Key Creation
The hierarchical deterministic key creation and transfer protocol (HD protocol) greatly simplifies wallet backups, eliminates the need for repeated communication between multiple programs using the same wallet, permits creation of child accounts which can operate independently, gives each parent account the ability to monitor or control its children even if the child account is compromised, and divides each account into full-access and restricted-access parts so untrusted users or programs can be allowed to receive or monitor payments without being able to spend them.
point(private_key) == public_key
Because of the way
point() works, it’s possible to create a child
public key by combining an
existing (parent) public key with another public key created from any
integer (i) value. This child public key is the same public key which
would be created by the
point() function if you added the i value to
the original (parent) private key and then found the remainder of that
sum divided by a global constant used by all Bitcoin software (p):
point( (parent_private_key + i) % p ) == parent_public_key + point(i)
This means that two or more independent programs which agree on a sequence of integers can create a series of unique child key pairs from a single parent key pair without any further communication. Moreover, the program which distributes new public keys for receiving payment can do so without any access to the private keys, allowing the public key distribution program to run on a possibly-insecure platform such as a public web server.
point( (child_private_key + i) % p ) == child_public_key + point(i)
Whether creating child public keys or further-descended public keys, a predictable sequence of integer values would be no better than using a single public key for all transactions, as anyone who knew one child public key could find all of the other child public keys created from the same parent public key. Instead, a random seed can be used to deterministically generate the sequence of integer values so that the relationship between the child public keys is invisible to anyone without that seed.
The HD protocol uses a single root seed to create a hierarchy of child, grandchild, and other descended keys with unlinkable deterministically-generated integer values. Each child key also gets a deterministically-generated seed from its parent, called a chain code, so the compromising of one chain code doesn’t necessarily compromise the integer sequence for the whole hierarchy, allowing the master chain code to continue being useful even if, for example, a web-based public key distribution program gets hacked.
As illustrated above, HD key derivation takes four inputs:
The parent chain code is 256 bits of seemingly-random data.
The index number is a 32-bit integer specified by the program.
In the normal form shown in the above illustration, the parent chain code, the parent public key, and the index number are fed into a one-way cryptographic hash (HMAC-SHA512) to produce 512 bits of deterministically-generated-but-seemingly-random data. The seemingly-random 256 bits on the righthand side of the hash output are used as a new child chain code. The seemingly-random 256 bits on the lefthand side of the hash output are used as the integer value to be combined with either the parent private key or parent public key to, respectively, create either a child private key or child public key:
child_private_key == (parent_private_key + lefthand_hash_output) % G child_public_key == point( (parent_private_key + lefthand_hash_output) % G ) child_public_key == point(child_private_key) == parent_public_key + point(lefthand_hash_output)
Specifying different index numbers will create different unlinkable child keys from the same parent keys. Repeating the procedure for the child keys using the child chain code will create unlinkable grandchild keys.
Because creating child keys requires both a key and a chain code, the key and chain code together are called the extended key. An extended private key and its corresponding extended public key have the same chain code. The (top-level parent) master private key and master chain code are derived from random data, as illustrated below.
A root seed is created from either 128 bits, 256 bits, or 512 bits of random data. This root seed of as little as 128 bits is the only data the user needs to backup in order to derive every key created by a particular wallet program using particular settings.
Warning: As of this writing, HD wallet programs are not expected to be fully compatible, so users must only use the same HD wallet program with the same HD-related settings for a particular root seed.
The root seed is hashed to create 512 bits of seemingly-random data,
from which the master private key and master chain code are created
(together, the master extended private key). The master public key is
derived from the master private key using
point(), which, together
with the master chain code, is the master extended public
key. The master extended keys are functionally equivalent to other
extended keys; it is only their location at the top of the hierarchy
which makes them special.
Hardened extended keys fix a potential problem with normal extended keys. If an attacker gets a normal parent chain code and parent public key, he can brute-force all chain codes deriving from it. If the attacker also obtains a child, grandchild, or further-descended private key, he can use the chain code to generate all of the extended private keys descending from that private key, as shown in the grandchild and great-grandchild generations of the illustration below.
Perhaps worse, the attacker can reverse the normal child private key derivation formula and subtract a parent chain code from a child private key to recover the parent private key, as shown in the child and parent generations of the illustration above. This means an attacker who acquires an extended public key and any private key descended from it can recover that public key’s private key and all keys descended from it.
For this reason, the chain code part of an extended public key should be better secured than standard public keys and users should be advised against exporting even non-extended private keys to possibly-untrustworthy environments.
This can be fixed, with some tradeoffs, by replacing the normal key derivation formula with a hardened key derivation formula.
The normal key derivation formula, described in the section above, combines together the index number, the parent chain code, and the parent public key to create the child chain code and the integer value which is combined with the parent private key to create the child private key.
The hardened formula, illustrated above, combines together the index number, the parent chain code, and the parent private key to create the data used to generate the child chain code and child private key. This formula makes it impossible to create child public keys without knowing the parent private key. In other words, parent extended public keys can’t create hardened child public keys.
Because of that, a hardened extended private key is much less useful than a normal extended private key—however, hardened extended private keys create a firewall through which multi-level key derivation compromises cannot happen. Because hardened child extended public keys cannot generate grandchild chain codes on their own, the compromise of a parent extended public key cannot be combined with the compromise of a grandchild private key to create great-grandchild extended private keys.
The HD protocol uses different index numbers to indicate whether a normal or hardened key should be generated. Index numbers from 0x00 to 0x7fffffff (0 to 231-1) will generate a normal key; index numbers from 0x80000000 to 0xffffffff will generate a hardened key. To make descriptions easy, many developers use the prime symbol to indicate hardened keys, so the first normal key (0x00) is 0 and the first hardened key (0x80000000) is 0´.
(Bitcoin developers typically use the ASCII apostrophe rather than the unicode prime symbol, a convention we will henceforth follow.)
This compact description is further combined with slashes prefixed by m or M to indicate hierarchy and key type, with m being a private key and M being a public key. For example, m/0’/0/122’ refers to the 123rd hardened private child (by index number) of the first normal child (by index) of the first hardened child (by index) of the master private key. The following hierarchy illustrates prime notation and hardened key firewalls.
Wallets following the BIP32 HD protocol only create hardened children of the master private key (m) to prevent a compromised child key from compromising the master key. As there are no normal children for the master keys, the master public key is not used in HD wallets. All other keys can have normal children, so the corresponding extended public keys may be used instead.
The HD protocol also describes a serialization format for extended public keys and extended private keys. For details, please see the wallet section in the developer reference or BIP32 for the full HD protocol specification.
Storing Root Seeds
Root seeds in the HD protocol are 128, 256, or 512 bits of random data which must be backed up precisely. To make it more convenient to use non-digital backup methods, such as memorization or hand-copying, BIP39 defines a method for creating a 512-bit root seed from a pseudo-sentence (mnemonic) of common natural-language words which was itself created from 128 to 256 bits of entropy and optionally protected by a password.
The number of words generated correlates to the amount of entropy used:
The passphrase can be of any length. It is simply appended to the mnemonic pseudo-sentence, and then both the mnemonic and password are hashed 2,048 times using HMAC-SHA512, resulting in a seemingly-random 512-bit seed. Because any input to the hash function creates a seemingly-random 512-bit seed, there is no fundamental way to prove the user entered the correct password, possibly allowing the user to protect a seed even when under duress.
For implementation details, please see BIP39.
Loose-Key wallets, also called “Just a Bunch Of Keys (JBOK)”, are a deprecated form of wallet that originated from the Bitcoin Core client wallet. The Bitcoin Core client wallet would create 100 private key/public key pairs automatically via a Pseudo-Random-Number Generator (PRNG) for later use.
These unused private keys are stored in a virtual “key pool”, with new keys being generated whenever a previously-generated key was used, ensuring the pool maintained 100 unused keys. (If the wallet is encrypted, new keys are only generated while the wallet is unlocked.)
This created considerable difficulty in backing up one’s keys, considering backups have to be run manually to save the newly-generated private keys. If a new key pair set is generated, used, and then lost prior to a backup, the stored satoshis are likely lost forever. Many older-style mobile wallets followed a similar format, but only generated a new private key upon user demand.
This wallet type is being actively phased out and discouraged from being used due to the backup hassle.
Payment processing encompasses the steps spenders and receivers perform to make and accept payments in exchange for products or services. The basic steps have not changed since the dawn of commerce, but the technology has. This section will explain how receivers and spenders can, respectively, request and make payments using Bitcoin—and how they can deal with complications such as refunds and recurrent rebilling.
The figure above illustrates payment processing using Bitcoin from a receiver’s perspective, starting with a new order. The following subsections will each address the three common steps and the three occasional or optional steps.
It is worth mentioning that each of these steps can be outsourced by using third party APIs and services.
Exchange rate data is widely available through HTTP-based APIs provided by currency exchanges. Several organizations also aggregate data from multiple exchanges to create index prices, which are also available using HTTP-based APIs.
Any applications which automatically calculate order totals using exchange rate data must take steps to ensure the price quoted reflects the current general market value of satoshis, or the applications could accept too few satoshis for the product or service being sold. Alternatively, they could ask for too many satoshis, driving away potential spenders.
To minimize problems, your applications may want to collect data from at least two separate sources and compare them to see how much they differ. If the difference is substantial, your applications can enter a safe mode until a human is able to evaluate the situation.
You may also want to program your applications to enter a safe mode if exchange rates are rapidly increasing or decreasing, indicating a possible problem in the Bitcoin market which could make it difficult to spend any satoshis received today.
Exchange rates lie outside the control of Bitcoin and related technologies, so there are no new or planned technologies which will make it significantly easier for your program to correctly convert order totals from fiat into satoshis.
Because the exchange rate fluctuates over time, order totals pegged to fiat must expire to prevent spenders from delaying payment in the hope that satoshis will drop in price. Most widely-used payment processing systems currently expire their invoices after 10 to 20 minutes.
Shorter expiration periods increase the chance the invoice will expire before payment is received, possibly necessitating manual intervention to request an additional payment or to issue a refund. Longer expiration periods increase the chance that the exchange rate will fluctuate a significant amount before payment is received.
Before requesting payment, your application must create a Bitcoin address, or acquire an address from another program such as Bitcoin Core. Bitcoin addresses are described in detail in the Transactions section. Also described in that section are two important reasons to avoid using an address more than once—but a third reason applies especially to payment requests:
Using a separate address for each incoming payment makes it trivial to determine which customers have paid their payment requests. Your applications need only track the association between a particular payment request and the address used in it, and then scan the block chain for transactions matching that address.
The next subsections will describe in detail the following four compatible ways to give the spender the address and amount to be paid. For increased convenience and compatibility, providing all of these options in your payment requests is recommended.
Almost all desktop wallets can associate with
bitcoin:URIs, so spenders can click a link to pre-fill the payment screen. This also works with many mobile wallets, but it generally does not work with web-based wallets unless the spender installs a browser extension or manually configures a URI handler.
Most mobile wallets support scanning
bitcoin:URIs encoded in a QR code, and almost all wallets can display them for accepting payment. While also handy for online orders, QR Codes are especially useful for in-person purchases.
Recent wallet updates add support for the new payment protocol providing increased security, authentication of a receiver’s identity using X.509 certificates, and other important features such as refunds.
Warning: Special care must be taken to avoid the theft of incoming payments. In particular, private keys should not be stored on web servers, and payment requests should be sent over HTTPS or other secure methods to prevent man-in-the-middle attacks from replacing your Bitcoin address with the attacker’s address.
Pay: mjSk1Ny9spzU2fouzYgLqGUD8U41iR35QN Amount: 100 BTC You must pay by: 2014-04-01 at 23:00 UTC
Indicating the denomination is critical. As of this writing, popular Bitcoin wallet software defaults to denominating amounts in either bitcoins (BTC) , millibitcoins (mBTC) or microbitcoins (uBTC, “bits”). Choosing between each unit is widely supported, but other software also lets its users select denomination amounts from some preselected (e.g. Table below) or all standard 8 decimal places:
|0.000001||microbitcoin (uBTC, “bits”)|
bitcoin: URI scheme defined in BIP21 eliminates denomination
confusion and saves the spender from copying and pasting two separate
values. It also lets the payment request provide some additional
information to the spender. An example:
Only the address is required, and if it is the only thing specified, wallets will pre-fill a payment request with it and let the spender enter an amount. The amount specified is always in decimal bitcoins (BTC).
Two other parameters are widely supported. The
label parameter is generally used to
provide wallet software with the recipient’s name. The
message parameter is generally used
to describe the payment request to the spender. Both the label and the
message are commonly stored by the spender’s wallet software—but they
are never added to the actual transaction, so other Bitcoin users cannot
see them. Both the label and the message must be URI encoded.
All four parameters used together, with appropriate URI encoding, can be seen in the line-wrapped example below.
bitcoin:mjSk1Ny9spzU2fouzYgLqGUD8U41iR35QN\ ?amount=0.10\ &label=Example+Merchant\ &message=Order+of+flowers+%26+chocolates
The URI scheme can be extended, as will be seen in the payment protocol
section below, with both new optional and required parameters. As of this
writing, the only widely-used parameter besides the four described above
is the payment protocol’s
Programs accepting URIs in any form must ask the user for permission before paying unless the user has explicitly disabled prompting (as might be the case for micropayments).
QR codes are a popular way to exchange
bitcoin: URIs in person, in
images, or in videos. Most mobile Bitcoin wallet apps, and some desktop
wallets, support scanning QR codes to pre-fill their payment screens.
The figure below shows the same
bitcoin: URI code encoded as four
different Bitcoin QR codes at four
different error correction levels. The QR code can include the
parameters—and any other optional parameters—but they were
omitted here to keep the QR code small and easy to scan with unsteady
or low-resolution mobile cameras.
The error correction is combined with a checksum to ensure the Bitcoin QR code cannot be successfully decoded with data missing or accidentally altered, so your applications should choose the appropriate level of error correction based on the space you have available to display the code. Low-level damage correction works well when space is limited, and quartile-level damage correction helps ensure fast scanning when displayed on high-resolution screens.
Warning: The payment protocol is considered to be deprecated and will be removed in a later version of Bitcoin Core. The protocol has multiple security design flaws and implementation flaws in some wallets. Users will begin receiving deprecation warnings in Bitcoin Core version 0.18 when using BIP70 URI’s. Merchants should transition away from BIP70 to more secure options such as BIP21. Merchants should never require BIP70 payments and should provide BIP21 fallbacks.
Provides more detail about the requested payment to spenders.
Allows spenders to submit transactions directly to receivers without going through the peer-to-peer network. This can speed up payment processing and work with planned features such as child-pays-for-parent transaction fees and offline NFC or Bluetooth-based payments.
Instead of being asked to pay a meaningless address, such as “mjSk1Ny9spzU2fouzYgLqGUD8U41iR35QN”, spenders are asked to pay the Common Name (CN) description from the receiver’s X.509 certificate, such as “www.bitcoin.org”.
bitcoin:mjSk1Ny9spzU2fouzYgLqGUD8U41iR35QN\ ?amount=0.10\ &label=Example+Merchant\ &message=Order+of+flowers+%26+chocolates\ &r=https://example.com/pay/mjSk1Ny9spzU2fouzYgLqGUD8U41iR35QN
None of the parameters provided above, except
r, are required for the
payment protocol—but your applications may include them for backwards
compatibility with wallet programs which don’t yet handle the payment
r parameter tells payment-protocol-aware wallet programs to ignore
the other parameters and fetch a PaymentRequest from the URL provided.
The browser, QR code reader, or other program processing the URI opens
the spender’s Bitcoin wallet program on the URI.
The Payment Protocol is described in depth in BIP70, BIP71, and BIP72. An example CGI program and description of all the parameters which can be used in the Payment Protocol is provided in the Developer Examples Payment Protocol subsection. In this subsection, we will briefly describe in story format how the Payment Protocol is typically used.
Charlie, the client, is shopping on a website run by Bob, the businessman. Charlie adds a few items to his shopping cart and clicks the “Checkout With Bitcoin” button.
Bob’s server automatically adds the following information to its invoice database:
The details of Charlie’s order, including items ordered and shipping address.
An expiration time when that total will no longer be acceptable.
After adding all that information to the database, Bob’s server displays
bitcoin: URI for Charlie to click to pay.
Charlie clicks on the
bitcoin: URI in his browser. His browser’s URI
handler sends the URI to his wallet program. The wallet is aware of the
Payment Protocol, so it parses the
r parameter and sends an HTTP GET
to that URL looking for a PaymentRequest message.
The PaymentRequest message returned may include private information, such as Charlie’s
mailing address, but the wallet must be able to access it without using prior
authentication, such as HTTP cookies, so a publicly accessible HTTPS URL
with a guess-resistant part is typically used. The
unique public key created for the payment request can be used to create
a unique identifier. This is why, in the example URI above, the PaymentRequest
URL contains the P2PKH address:
After receiving the HTTP GET to the URL above, the PaymentRequest-generating CGI program on Bob’s webserver takes the unique identifier from the URL and looks up the corresponding details in the database. It then creates a PaymentDetails message with the following information:
A memo containing the list of items ordered, so Charlie knows what he’s paying for. It may also include Charlie’s mailing address so he can double-check it.
The time the PaymentDetails message was created plus the time it expires.
A URL to which Charlie’s wallet should send its completed transaction.
That PaymentDetails message is put inside a PaymentRequest message. The payment request lets Bob’s server sign the entire Request with the server’s X.509 SSL certificate. (The Payment Protocol has been designed to allow other signing methods in the future.) Bob’s server sends the payment request to Charlie’s wallet in the reply to the HTTP GET.
Charlie’s wallet receives the PaymentRequest message, checks its signature, and then displays the details from the PaymentDetails message to Charlie. Charlie agrees to pay, so the wallet constructs a payment to the pubkey script Bob’s server provided. Unlike a traditional Bitcoin payment, Charlie’s wallet doesn’t necessarily automatically broadcast this payment to the network. Instead, the wallet constructs a Payment message and sends it to the URL provided in the PaymentDetails message as an HTTP POST. Among other things, the Payment message contains:
The signed transaction in which Charlie pays Bob.
An optional memo Charlie can send to Bob. (There’s no guarantee that Bob will read it.)
Bob’s server receives the Payment message, verifies the transaction pays the requested amount to the address provided, and then broadcasts the transaction to the network. It also replies to the HTTP POSTed Payment message with a PaymentACK message, which includes an optional memo from Bob’s server thanking Charlie for his patronage and providing other information about the order, such as the expected arrival date.
Charlie’s wallet sees the PaymentACK and tells Charlie that the payment has been sent. The PaymentACK doesn’t mean that Bob has verified Charlie’s payment—see the Verifying Payment subsection below—but it does mean that Charlie can go do something else while the transaction gets confirmed. After Bob’s server verifies from the block chain that Charlie’s transaction has been suitably confirmed, it authorizes shipping Charlie’s order.
In the case of a dispute, Charlie can generate a cryptographically proven receipt out of the various signed or otherwise-proven information.
As explained in the Transactions and Block Chain sections, broadcasting a transaction to the network doesn’t ensure that the receiver gets paid. A malicious spender can create one transaction that pays the receiver and a second one that pays the same input back to himself. Only one of these transactions will be added to the block chain, and nobody can say for sure which one it will be.
Once the transaction is included in a block, double spends are impossible without modifying block chain history to replace the transaction, which is quite difficult. Using this system, the Bitcoin protocol can give each of your transactions an updating confidence score based on the number of blocks which would need to be modified to replace a transaction. For each block, the transaction gains one confirmation. Since modifying blocks is quite difficult, higher confirmation scores indicate greater protection.
0 confirmations: The transaction has been broadcast but is still not included in any block. Zero confirmation transactions (unconfirmed transactions) should generally not be trusted without risk analysis. Although miners usually confirm the first transaction they receive, fraudsters may be able to manipulate the network into including their version of a transaction.
1 confirmation: The transaction is included in the latest block and double-spend risk decreases dramatically. Transactions which pay sufficient transaction fees need 10 minutes on average to receive one confirmation. However, the most recent block gets replaced fairly often by accident, so a double spend is still a real possibility.
2 confirmations: The most recent block was chained to the block which includes the transaction. As of March 2014, two block replacements were exceedingly rare, and a two block replacement attack was impractical without expensive mining equipment.
6 confirmations: The network has spent about an hour working to protect the transaction against double spends and the transaction is buried under six blocks. Even a reasonably lucky attacker would require a large percentage of the total network hashing power to replace six blocks. Although this number is somewhat arbitrary, software handling high-value transactions, or otherwise at risk for fraud, should wait for at least six confirmations before treating a payment as accepted.
Bitcoin Core provides several RPCs which can provide your program with the
confirmation score for transactions in your wallet or arbitrary transactions.
For example, the
listunspent RPC provides an array of every satoshi you can
spend along with its confirmation score.
In the case when the program or its user is accepting high value transactions and cannot wait for at least six confirmations or more.
In the case of an implementation bug or prolonged attack against Bitcoin which makes the system less reliable than expected.
An interesting source of double-spend risk analysis can be acquired by connecting to large numbers of Bitcoin peers to track how transactions and blocks differ from each other. Some third-party APIs can provide you with this type of service.
For example, unconfirmed transactions can be compared among all connected peers to see if any UTXO is used in multiple unconfirmed transactions, indicating a double-spend attempt, in which case the payment can be refused until it is confirmed. Transactions can also be ranked by their transaction fee to estimate the amount of time until they’re added to a block.
Another example could be to detect a fork when multiple peers report differing block header hashes at the same block height. Your program can go into a safe mode if the fork extends for more than two blocks, indicating a possible problem with the block chain. For more details, see the Detecting Forks subsection.
Another good source of double-spend protection can be human intelligence. For example, fraudsters may act differently from legitimate customers, letting savvy merchants manually flag them as high risk. Your program can provide a safe mode which stops automatic payment acceptance on a global or per-customer basis.
Occasionally receivers using your applications will need to issue refunds. The obvious way to do that, which is very unsafe, is simply to return the satoshis to the pubkey script from which they came. For example:
Alice wants to buy a widget from Bob, so Bob gives Alice a price and Bitcoin address.
Alice opens her wallet program and sends some satoshis to that address. Her wallet program automatically chooses to spend those satoshis from one of its unspent outputs, an output corresponding to the Bitcoin address mjSk1Ny9spzU2fouzYgLqGUD8U41iR35QN.
This seems like it should work, but Alice is using a centralized multi-user web wallet which doesn’t give unique addresses to each user, so it has no way to know that Bob’s refund is meant for Alice. Now the refund is a unintentional donation to the company behind the centralized wallet, unless Alice opens a support ticket and proves those satoshis were meant for her.
This leaves receivers only two correct ways to issue refunds:
Note: it would be wise to contact the
spender directly if the refund is being issued a long time after the
original payment was made.
This allows you to ensure the user still has access to the key or keys
Disbursing Income (Limiting Forex Risk)
Many receivers worry that their satoshis will be less valuable in the future than they are now, called foreign exchange (forex) risk. To limit forex risk, many receivers choose to disburse newly-acquired payments soon after they’re received.
If your application provides this business logic, it will need to choose which outputs to spend first. There are a few different algorithms which can lead to different results.
A last-in-first-out (LIFO) algorithm spends newly acquired satoshis while there’s still double spend risk, possibly pushing that risk on to others. This can be good for the receiver’s balance sheet but possibly bad for their reputation.
A first-in-first-out (FIFO) algorithm spends the oldest satoshis first, which can help ensure that the receiver’s payments always confirm, although this has utility only in a few edge cases.
When a receiver receives satoshis in an output, the spender can track (in a crude way) how the receiver spends those satoshis. But the spender can’t automatically see other satoshis paid to the receiver by other spenders as long as the receiver uses unique addresses for each transaction.
However, if the receiver spends satoshis from two different spenders in the same transaction, each of those spenders can see the other spender’s payment. This is called a merge, and the more a receiver merges outputs, the easier it is for an outsider to track how many satoshis the receiver has earned, spent, and saved.
Merge avoidance means trying to avoid spending unrelated outputs in the same transaction. For persons and businesses which want to keep their transaction data secret from other people, it can be an important strategy.
A crude merge avoidance strategy is to try to always pay with the smallest output you have which is larger than the amount being requested. For example, if you have four outputs holding, respectively, 100, 200, 500, and 900 satoshis, you would pay a bill for 300 satoshis with the 500-satoshi output. This way, as long as you have outputs larger than your bills, you avoid merging.
More advanced merge avoidance strategies largely depend on enhancements to the payment protocol which will allow payers to avoid merging by intelligently distributing their payments among multiple outputs provided by the receiver.
Last In, First Out (LIFO)
Outputs can be spent as soon as they’re received—even before they’re confirmed. Since recent outputs are at the greatest risk of being double-spent, spending them before older outputs allows the spender to hold on to older confirmed outputs which are much less likely to be double-spent.
There are two closely-related downsides to LIFO:
If you spend an output from one unconfirmed transaction in a second transaction and the first transaction’s output is successfully double spent to another output, the second transaction becomes invalid.
In either of the above cases, the receiver of the second transaction will see the incoming transaction notification disappear or turn into an error message.
Because LIFO puts the recipient of secondary transactions in as much double-spend risk as the recipient of the primary transaction, they’re best used when the secondary recipient doesn’t care about the risk—such as an exchange or other service which is going to wait for six confirmations whether you spend old outputs or new outputs.
LIFO should not be used when the primary transaction recipient’s reputation might be at stake, such as when paying employees. In these cases, it’s better to wait for transactions to be fully verified (see the Verification subsection above) before using them to make payments.
First In, First Out (FIFO)
The oldest outputs are the most reliable, as the longer it’s been since they were received, the more blocks would need to be modified to double spend them. However, after just a few blocks, a point of rapidly diminishing returns is reached. The original Bitcoin paper predicts the chance of an attacker being able to modify old blocks, assuming the attacker has 30% of the total network hashing power:
|Blocks||Chance of successful modification|
FIFO does have a small advantage when it comes to transaction fees, as older outputs may be eligible for inclusion in the 50,000 bytes set aside for no-fee-required high-priority transactions by miners running the default Bitcoin Core codebase. However, with transaction fees being so low, this is not a significant advantage.
The only practical use of FIFO is by receivers who spend all or most of their income within a few blocks, and who want to reduce the chance of their payments becoming accidentally invalid. For example, a receiver who holds each payment for six confirmations, and then spends 100% of verified payments to vendors and a savings account on a bi-hourly schedule.
Rebilling Recurring Payments
Automated recurring payments are not possible with decentralized Bitcoin wallets. Even if a wallet supported automatically sending non-reversible payments on a regular schedule, the user would still need to start the program at the appointed time, or leave it running all the time unprotected by encryption.
This means automated recurring Bitcoin payments can only be made from a centralized server which handles satoshis on behalf of its spenders. In practice, receivers who want to set prices in fiat terms must also let the same centralized server choose the appropriate exchange rate.
Non-automated rebilling can be managed by the same mechanism used before
credit-card recurring payments became common: contact the spender and
ask them to pay again—for example, by sending them a PaymentRequest
bitcoin: URI in an HTML email.
In the future, extensions to the payment protocol and new wallet features may allow some wallet programs to manage a list of recurring transactions. The spender will still need to start the program on a regular basis and authorize payment—but it should be easier and more secure for the spender than clicking an emailed invoice, increasing the chance receivers get paid on time.
Currently there are two primary methods of validating the block chain as a client: Full nodes and SPV clients. Other methods, such as server-trusting methods, are not discussed as they are not recommended.
The first and most secure model is the one followed by Bitcoin Core, also known as a “thick” or “full chain” client. This security model assures the validity of the block chain by downloading and validating blocks from the genesis block all the way to the most recently discovered block. This is known as using the height of a particular block to verify the client’s view of the network.
For a client to be fooled, an adversary would need to give a complete alternative block chain history that is of greater difficulty than the current “true” chain, which is computationally expensive (if not impossible) due to the fact that the chain with the most cumulative proof of work is by definition the “true” chain. Due to the computational difficulty required to generate a new block at the tip of the chain, the ability to fool a full node becomes very expensive after 6 confirmations. This form of verification is highly resistent to sybil attacks—only a single honest network peer is required in order to receive and verify the complete state of the “true” block chain.
Simplified Payment Verification (SPV)
An alternative approach detailed in the original Bitcoin paper is a client that only downloads the headers of blocks during the initial syncing process and then requests transactions from full nodes as needed. This scales linearly with the height of the block chain at only 80 bytes per block header, or up to 4.2MB per year, regardless of total block size.
As described in the white paper, the merkle root in the block header along with a merkle branch can prove to the SPV client that the transaction in question is embedded in a block in the block chain. This does not guarantee validity of the transactions that are embedded. Instead it demonstrates the amount of work required to perform a double-spend attack.
The block’s depth in the block chain corresponds to the cumulative difficulty that has been performed to build on top of that particular block. The SPV client knows the merkle root and associated transaction information, and requests the respective merkle branch from a full node. Once the merkle branch has been retrieved, proving the existence of the transaction in the block, the SPV client can then look to block depth as a proxy for transaction validity and security. The cost of an attack on a user by a malicious node who inserts an invalid transaction grows with the cumulative difficulty built on top of that block, since the malicious node alone will be mining this forged chain.
Potential SPV Weaknesses
If implemented naively, an SPV client has a few important weaknesses.
First, while the SPV client can not be easily fooled into thinking a transaction is in a block when it is not, the reverse is not true. A full node can simply lie by omission, leading an SPV client to believe a transaction has not occurred. This can be considered a form of Denial of Service. One mitigation strategy is to connect to a number of full nodes, and send the requests to each node. However this can be defeated by network partitioning or Sybil attacks, since identities are essentially free, and can be bandwidth intensive. Care must be taken to ensure the client is not cut off from honest nodes.
Second, the SPV client only requests transactions from full nodes corresponding to keys it owns. If the SPV client downloads all blocks and then discards unneeded ones, this can be extremely bandwidth intensive. If they simply ask full nodes for blocks with specific transactions, this allows full nodes a complete view of the public addresses that correspond to the user. This is a large privacy leak, and allows for tactics such as denial of service for clients, users, or addresses that are disfavored by those running full nodes, as well as trivial linking of funds. A client could simply spam many fake transaction requests, but this creates a large strain on the SPV client, and can end up defeating the purpose of thin clients altogether.
A Bloom filter is a space-efficient probabilistic data structure that is used to test membership of an element. The data structure achieves great data compression at the expense of a prescribed false positive rate.
A Bloom filter starts out as an array of n bits all set to 0. A set of k random hash functions are chosen, each of which output a single integer between the range of 1 and n.
Querying of the Bloom filter is done by using the same hash functions as before. If all k bits accessed in the bloom filter are set to 1, this demonstrates with high probability that the element lies in the set. Clearly, the k indices could have been set to 1 by the addition of a combination of other elements in the domain, but the parameters allow the user to choose the acceptable false positive rate.
Removal of elements can only be done by scrapping the bloom filter and re-creating it from scratch.
Application Of Bloom Filters
Rather than viewing the false positive rates as a liability, it is used to create a tunable parameter that represents the desired privacy level and bandwidth trade-off. A SPV client creates their Bloom filter and sends it to a full node using the message
filterload, which sets the filter for which transactions are desired. The command
filteradd allows addition of desired data to the filter without needing to send a totally new Bloom filter, and
filterclear allows the connection to revert to standard block discovery mechanisms. If the filter has been loaded, then full nodes will send a modified form of blocks, called a merkle block. The merkle block is simply the block header with the merkle branch associated with the set Bloom filter.
If a user is more privacy-conscious, he can set the Bloom filter to include more false positives, at the expense of extra bandwidth used for transaction discovery. If a user is on a tight bandwidth budget, he can set the false-positive rate to low, knowing that this will allow full nodes a clear view of what transactions are associated with his client.
There are future proposals such as Unspent Transaction Output (UTXO) commitments in the block chain to find a more satisfactory middle-ground for clients between needing a complete copy of the block chain, or trusting that a majority of your connected peers are not lying. UTXO commitments would enable a very secure client using a finite amount of storage using a data structure that is authenticated in the block chain. These type of proposals are, however, in very early stages, and will require soft forks in the network.
Until these types of operating modes are implemented, modes should be chosen based on the likely threat model, computing and bandwidth constraints, and liability in bitcoin value.
Resources: Original Thread on UTXO Commitments
The Bitcoin network protocol allows full nodes (peers) to collaboratively maintain a peer-to-peer network for block and transaction exchange. Full nodes download and verify every block and transaction prior to relaying them to other nodes. Archival nodes are full nodes which store the entire blockchain and can serve historical blocks to other nodes. Pruned nodes are full nodes which do not store the entire blockchain. Many SPV clients also use the Bitcoin network protocol to connect to full nodes.
Consensus rules do not cover networking, so Bitcoin programs may use alternative networks and protocols, such as the high-speed block relay network used by some miners and the dedicated transaction information servers used by some wallets that provide SPV-level security.
To provide practical examples of the Bitcoin peer-to-peer network, this section uses Bitcoin Core as a representative full node and BitcoinJ as a representative SPV client. Both programs are flexible, so only default behavior is described. Also, for privacy, actual IP addresses in the example output below have been replaced with RFC5737 reserved IP addresses.
When started for the first time, programs don’t know the IP
addresses of any active full nodes. In order to discover some IP
addresses, they query one or more DNS names (called DNS seeds)
hardcoded into Bitcoin Core and
BitcoinJ. The response to the lookup should include one or more DNS
A records with the IP addresses of full nodes that may accept new
incoming connections. For example, using the Unix
;; QUESTION SECTION: ;seed.bitcoin.sipa.be. IN A ;; ANSWER SECTION: seed.bitcoin.sipa.be. 60 IN A 192.0.2.113 seed.bitcoin.sipa.be. 60 IN A 198.51.100.231 seed.bitcoin.sipa.be. 60 IN A 203.0.113.183 [...]
The DNS seeds are maintained by Bitcoin community members: some of them provide dynamic DNS seed servers which automatically get IP addresses of active nodes by scanning the network; others provide static DNS seeds that are updated manually and are more likely to provide IP addresses for inactive nodes. In either case, nodes are added to the DNS seed if they run on the default Bitcoin ports of 8333 for mainnet or 18333 for testnet.
DNS seed results are not authenticated and a malicious seed operator or network man-in-the-middle attacker can return only IP addresses of nodes controlled by the attacker, isolating a program on the attacker’s own network and allowing the attacker to feed it bogus transactions and blocks. For this reason, programs should not rely on DNS seeds exclusively.
Once a program has connected to the network, its peers can begin to send
(address) messages with the IP addresses and port numbers of
other peers on the network, providing a fully decentralized method of
peer discovery. Bitcoin Core keeps a record of known peers in a
persistent on-disk database which usually allows it to connect directly
to those peers on subsequent startups without having to use DNS seeds.
However, peers often leave the network or change IP addresses, so programs may need to make several different connection attempts at startup before a successful connection is made. This can add a significant delay to the amount of time it takes to connect to the network, forcing a user to wait before sending a transaction or checking the status of payment.
To avoid this possible delay, BitcoinJ always uses dynamic DNS seeds to get IP addresses for nodes believed to be currently active. Bitcoin Core also tries to strike a balance between minimizing delays and avoiding unnecessary DNS seed use: if Bitcoin Core has entries in its peer database, it spends up to 11 seconds attempting to connect to at least one of them before falling back to seeds; if a connection is made within that time, it does not query any seeds.
Both Bitcoin Core and BitcoinJ also include a hardcoded list of IP addresses and port numbers to several dozen nodes which were active around the time that particular version of the software was first released. Bitcoin Core will start attempting to connect to these nodes if none of the DNS seed servers have responded to a query within 60 seconds, providing an automatic fallback option.
As a manual fallback option, Bitcoin Core also provides several
command-line connection options, including the ability to get a list of
peers from a specific node by IP address, or to make a persistent
connection to a specific node by IP address. See the
-help text for
details. BitcoinJ can be programmed to do the same thing.
Resources: Bitcoin Seeder, the program run by several of the seeds used by Bitcoin Core and BitcoinJ. The Bitcoin Core DNS Seed Policy. The hardcoded list of IP addresses used by Bitcoin Core and BitcoinJ is generated using the makeseeds script.
Connecting To Peers
Connecting to a peer is done by sending a
version message, which
contains your version number, block, and current time to the remote
node. The remote node responds with its own
version message. Then both
nodes send a
verack message to the other node to indicate the
connection has been established.
In order to maintain a connection with a peer, nodes by default will send a message to peers before 30 minutes of inactivity. If 90 minutes pass without a message being received by a peer, the client will assume that connection has closed.
Initial Block Download
Before a full node can validate unconfirmed transactions and recently-mined blocks, it must download and validate all blocks from block 1 (the block after the hardcoded genesis block) to the current tip of the best block chain. This is the Initial Block Download (IBD) or initial sync.
Although the word “initial” implies this method is only used once, it can also be used any time a large number of blocks need to be downloaded, such as when a previously-caught-up node has been offline for a long time. In this case, a node can use the IBD method to download all the blocks which were produced since the last time it was online.
Bitcoin Core uses the IBD method any time the last block on its local best block chain has a block header time more than 24 hours in the past. Bitcoin Core 0.10.0 will also perform IBD if its local best block chain is more than 144 blocks lower than its local best header chain (that is, the local block chain is more than about 24 hours in the past).
The first time a node is started, it only has a single block in its
local best block chain—the hardcoded genesis block (block 0). This
node chooses a remote peer, called the sync node, and sends it the
getblocks message illustrated below.
In the header hashes field of the
getblocks message, this new node
sends the header hash of the only block it has, the genesis block
(6fe2…0000 in internal byte order). It also sets the stop hash field
to all zeroes to request a maximum-size response.
Upon receipt of the
getblocks message, the sync node takes the first
(and only) header hash and searches its local best block chain for a
block with that header hash. It finds that block 0 matches, so it
replies with 500 block inventories (the maximum response to a
getblocks message) starting from block 1. It sends these inventories
inv message illustrated below.
Inventories are unique identifiers for information on the network. Each inventory contains a type field and the unique identifier for an instance of the object. For blocks, the unique identifier is a hash of the block’s header.
The block inventories appear in the
inv message in the same order they
appear in the block chain, so this first
inv message contains
inventories for blocks 1 through 501. (For example, the hash of block 1
is 4860…0000 as seen in the illustration above.)
It’s important to blocks-first nodes that the blocks be requested and sent in order because each block header references the header hash of the preceding block. That means the IBD node can’t fully validate a block until its parent block has been received. Blocks that can’t be validated because their parents haven’t been received are called orphan blocks; a subsection below describes them in more detail.
Upon receipt of the
getdata message, the sync node replies with each
of the blocks requested. Each block is put into serialized block format
and sent in a separate
block message. The first
block message sent
(for block 1) is illustrated below.
The IBD node downloads each block, validates it, and then requests the
next block it hasn’t requested yet, maintaining a queue of up to 128
blocks to download. When it has requested every block for which it has
an inventory, it sends another
getblocks message to the sync node
requesting the inventories of up to 500 more blocks. This second
getblocks message contains multiple header hashes as illustrated
Upon receipt of the second
getblocks message, the sync node searches
its local best block chain for a block that matches one of the header
hashes in the message, trying each hash in the order they were received.
If it finds a matching hash, it replies with 500 block inventories
starting with the next block from that point. But if there is no
matching hash (besides the stopping hash), it assumes the only block the
two nodes have in common is block 0 and so it sends an
inv starting with
block 1 (the same
inv message seen several illustrations above).
This repeated search allows the sync node to send useful inventories even if the IBD node’s local block chain forked from the sync node’s local block chain. This fork detection becomes increasingly useful the closer the IBD node gets to the tip of the block chain.
When the IBD node receives the second
inv message, it will request
those blocks using
getdata messages. The sync node will respond with
block messages. Then the IBD node will request more inventories with
getblocks message—and the cycle will repeat until the IBD
node is synced to the tip of the block chain. At that point, the node
will accept blocks sent through the regular block broadcasting described
in a later subsection.
Blocks-First Advantages & Disadvantages
Speed Limits: All requests are made to the sync node, so if the sync node has limited upload bandwidth, the IBD node will have slow download speeds. Note: if the sync node goes offline, Bitcoin Core will continue downloading from another node—but it will still only download from a single sync node at a time.
Download Restarts: The sync node can send a non-best (but otherwise valid) block chain to the IBD node. The IBD node won’t be able to identify it as non-best until the initial block download nears completion, forcing the IBD node to restart its block chain download over again from a different node. Bitcoin Core ships with several block chain checkpoints at various block heights selected by developers to help an IBD node detect that it is being fed an alternative block chain history—allowing the IBD node to restart its download earlier in the process.
Disk Fill Attacks: Closely related to the download restarts, if the sync node sends a non-best (but otherwise valid) block chain, the chain will be stored on disk, wasting space and possibly filling up the disk drive with useless data.
High Memory Use: Whether maliciously or by accident, the sync node can send blocks out of order, creating orphan blocks which can’t be validated until their parents have been received and validated. Orphan blocks are stored in memory while they await validation, which may lead to high memory use.
Resources: The table below summarizes the messages mentioned throughout this subsection. The links in the message field will take you to the reference page for that message.
|Payload||One or more header hashes||Up to 500 block inventories (unique identifiers)||One or more block inventories||One serialized block|
Bitcoin Core 0.10.0 uses an initial block download (IBD) method called headers-first. The goal is to download the headers for the best header chain, partially validate them as best as possible, and then download the corresponding blocks in parallel. This solves several problems with the older blocks-first IBD method.
The first time a node is started, it only has a single block in its
local best block chain—the hardcoded genesis block (block 0). The
node chooses a remote peer, which we’ll call the sync node, and sends it the
getheaders message illustrated below.
In the header hashes field of the
getheaders message, the new node
sends the header hash of the only block it has, the genesis block
(6fe2…0000 in internal byte order). It also sets the stop hash field
to all zeroes to request a maximum-size response.
Upon receipt of the
getheaders message, the sync node takes the first
(and only) header hash and searches its local best block chain for a
block with that header hash. It finds that block 0 matches, so it
replies with 2,000 header (the maximum response) starting from
block 1. It sends these header hashes in the
The IBD node can partially validate these block headers by ensuring that all fields follow consensus rules and that the hash of the header is below the target threshold according to the nBits field. (Full validation still requires all transactions from the corresponding block.)
Download More Headers: the IBD node can send another
getheadersmessage to the sync node to request the next 2,000 headers on the best header chain. Those headers can be immediately validated and another batch requested repeatedly until a
headersmessage is received from the sync node with fewer than 2,000 headers, indicating that it has no more headers to offer. As of this writing, headers sync can be completed in fewer than 200 round trips, or about 32 MB of downloaded data.
Once the IBD node receives a
headersmessage with fewer than 2,000 headers from the sync node, it sends a
getheadersmessage to each of its outbound peers to get their view of best header chain. By comparing the responses, it can easily determine if the headers it has downloaded belong to the best header chain reported by any of its outbound peers. This means a dishonest sync node will quickly be discovered even if checkpoints aren’t used (as long as the IBD node connects to at least one honest peer; Bitcoin Core will continue to provide checkpoints in case honest peers can’t be found).
Download Blocks: While the IBD node continues downloading headers, and after the headers finish downloading, the IBD node will request and download each block. The IBD node can use the block header hashes it computed from the header chain to create
getdatamessages that request the blocks it needs by their inventory. It doesn’t need to request these from the sync node—it can request them from any of its full node peers. (Although not all full nodes may store all blocks.) This allows it to fetch blocks in parallel and avoid having its download speed constrained to the upload speed of a single sync node.
To spread the load between multiple peers, Bitcoin Core will only request up to 16 blocks at a time from a single peer. Combined with its maximum of 8 outbound connections, this means headers-first Bitcoin Core will request a maximum of 128 blocks simultaneously during IBD (the same maximum number that blocks-first Bitcoin Core requested from its sync node).
Bitcoin Core’s headers-first mode uses a 1,024-block moving download window to maximize download speed. The lowest-height block in the window is the next block to be validated; if the block hasn’t arrived by the time Bitcoin Core is ready to validate it, Bitcoin Core will wait a minimum of two more seconds for the stalling node to send the block. If the block still hasn’t arrived, Bitcoin Core will disconnect from the stalling node and attempt to connect to another node. For example, in the illustration above, Node A will be disconnected if it doesn’t send block 3 within at least two seconds.
Resources: The table below summarizes the messages mentioned throughout this subsection. The links in the message field will take you to the reference page for that message.
|Payload||One or more header hashes||Up to 2,000 block headers||One or more block inventories derived from header hashes||One serialized block|
Unsolicited Block Push: the miner sends a
blockmessage to each of its full node peers with the new block. The miner can reasonably bypass the standard relay method in this way because it knows none of its peers already have the just-discovered block.
Standard Block Relay: the miner, acting as a standard relay node, sends an
invmessage to each of its peers (both full node and SPV) with an inventory referring to the new block. The most common responses are:
Each headers-first (HF) peer that wants the block replies with a
getheadersmessage containing the header hash of the highest-height header on its best header chain, and likely also some headers further back on the best header chain to allow fork detection. That message is immediately followed by a
getdatamessage requesting the full block. By requesting headers first, a headers-first peer can refuse orphan blocks as described in the subsection below.
The miner replies to each request accordingly by sending the block in a
blockmessage, one or more headers in a
headersmessage, or the merkle block and transactions relative to the SPV client’s bloom filter in a
merkleblockmessage followed by zero or more
Direct Headers Announcement: a relay node may skip the round trip overhead of an
invmessage followed by
getheadersby instead immediately sending a
headersmessage containing the full header of the new block. A HF peer receiving this message will partially validate the block header as it would during headers-first IBD, then request the full block contents with a
getdatamessage if the header is valid. The relay node then responds to the
getdatarequest with the full or filtered block data in a
merkleblockmessage, respectively. A HF node may signal that it prefers to receive
invannouncements by sending a special
sendheadersmessage during the connection handshake.
This protocol for block broadcasting was proposed in BIP 130 and has been implemented in Bitcoin Core since version 0.12.
By default, Bitcoin Core broadcasts blocks using direct headers
announcement to any peers that have signalled with
uses standard block relay for all peers that have not. Bitcoin Core
will accept blocks sent using any of the methods described above.
Full nodes validate the received block and then advertise it to their peers using the standard block relay method described above. The condensed table below highlights the operation of the messages described above (Relay, BF, HF, and SPV refer to the relay node, a blocks-first node, a headers-first node, and an SPV client; any refers to a node using any block retrieval method.)
|Payload||The inventory of the new block||The inventory of the new block||One or more header hashes on the HF node’s best header chain (BHC)||Up to 2,000 headers connecting HF node’s BHC to relay node’s BHC|
|Payload||The new block in serialized format||The new block filtered into a merkle block||Serialized transactions from the new block that match the bloom filter|
Blocks-first nodes may download orphan blocks—blocks whose previous block header hash field refers to a block header this node hasn’t seen yet. In other words, orphan blocks have no known parent (unlike stale blocks, which have known parents but which aren’t part of the best block chain).
When a blocks-first node downloads an orphan block, it will not validate
it. Instead, it will send a
getblocks message to the node which sent
the orphan block; the broadcasting node will respond with an
containing inventories of any blocks the downloading node is missing (up
to 500); the downloading node will request those blocks with a
message; and the broadcasting node will send those blocks with a
message. The downloading node will validate those blocks, and once the
parent of the former orphan block has been validated, it will validate
the former orphan block.
Headers-first nodes avoid some of this complexity by always requesting
block headers with the
getheaders message before requesting a block
getdata message. The broadcasting node will send a
message containing all the block headers (up to 2,000) it thinks the
downloading node needs to reach the tip of the best header chain; each of
those headers will point to its parent, so when the downloading node
block message, the block shouldn’t be an orphan
block—all of its parents should be known (even if they haven’t been
validated yet). If, despite this, the block received in the
message is an orphan block, a headers-first node will discard it immediately.
In order to send a transaction to a peer, an
inv message is sent. If a
getdata response message is received, the transaction is sent using
tx. The peer receiving this transaction also forwards the transaction in the same manner, given that it is a valid transaction.
Full peers may keep track of unconfirmed transactions which are eligible to be included in the next block. This is essential for miners who will actually mine some or all of those transactions, but it’s also useful for any peer who wants to keep track of unconfirmed transactions, such as peers serving unconfirmed transaction information to SPV clients.
Because unconfirmed transactions have no permanent status in Bitcoin, Bitcoin Core stores them in non-persistent memory, calling them a memory pool or mempool. When a peer shuts down, its memory pool is lost except for any transactions stored by its wallet. This means that never-mined unconfirmed transactions tend to slowly disappear from the network as peers restart or as they purge some transactions to make room in memory for others.
Transactions which are mined into blocks that later become stale blocks may be added back into the memory pool. These re-added transactions may be re-removed from the pool almost immediately if the replacement blocks include them. This is the case in Bitcoin Core, which removes stale blocks from the chain one by one, starting with the tip (highest block). As each block is removed, its transactions are added back to the memory pool. After all of the stale blocks are removed, the replacement blocks are added to the chain one by one, ending with the new tip. As each block is added, any transactions it confirms are removed from the memory pool.
SPV clients don’t have a memory pool for the same reason they don’t relay transactions. They can’t independently verify that a transaction hasn’t yet been included in a block and that it only spends UTXOs, so they can’t know which transactions are eligible to be included in the next block.
Take note that for both types of broadcasting, mechanisms are in place to punish misbehaving peers who take up bandwidth and computing resources by sending false information. If a peer gets a banscore above the
-banscore=<n> threshold, he will be banned for the number of seconds defined by
-bantime=<n>, which is 86,400 by default (24 hours).
Removed in Bitcoin Core 0.13.0
Earlier versions of Bitcoin Core allowed developers and trusted community members to issue Bitcoin alerts to notify users of critical network-wide issues. This messaging system was retired in Bitcoin Core v0.13.0; however, internal alerts, partition detection warnings and the
-alertnotify option features remain.
Solo mining, where the miner attempts to generate new blocks on his own, with the proceeds from the block reward and transaction fees going entirely to himself, allowing him to receive large payments with a higher variance (longer time between payments)
Pooled mining, where the miner pools resources with other miners to find blocks more often, with the proceeds being shared among the pool miners in rough correlation to the amount of hashing power they each contributed, allowing the miner to receive small payments with a lower variance (shorter time between payments).
As illustrated below, solo miners typically use
bitcoind to get new
transactions from the network. Their mining software periodically polls
bitcoind for new transactions using the
getblocktemplate RPC, which
provides the list of new transactions plus the public key to which the
coinbase transaction should be sent.
The mining software constructs a block using the template (described below) and creates a block header. It then sends the 80-byte block header to its mining hardware (an ASIC) along with a target threshold (difficulty setting). The mining hardware iterates through every possible value for the block header nonce and generates the corresponding hash.
If none of the hashes are below the threshold, the mining hardware gets an updated block header with a new merkle root from the mining software; this new block header is created by adding extra nonce data to the coinbase field of the coinbase transaction.
On the other hand, if a hash is found below the target threshold, the
mining hardware returns the block header with the successful nonce to
the mining software. The mining software combines the header with the
block and sends the completed block to
bitcoind to be broadcast to the network for addition to the
Pool miners follow a similar workflow, illustrated below, which allows
mining pool operators to pay miners based on their share of the work
done. The mining pool gets new transactions from the network using
bitcoind. Using one of the methods discussed later, each miner’s mining
software connects to the pool and requests the information it needs to
construct block headers.
In pooled mining, the mining pool sets the target threshold a few orders of magnitude higher (less difficult) than the network difficulty. This causes the mining hardware to return many block headers which don’t hash to a value eligible for inclusion on the block chain but which do hash below the pool’s target, proving (on average) that the miner checked a percentage of the possible hash values.
The miner then sends to the pool a copy of the information the pool needs to validate that the header will hash below the target and that the block of transactions referred to by the header merkle root field is valid for the pool’s purposes. (This usually means that the coinbase transaction must pay the pool.)
The information the miner sends to the pool is called a share because it proves the miner did a share of the work. By chance, some shares the pool receives will also be below the network target—the mining pool sends these to the network to be added to the block chain.
The block reward and transaction fees that come from mining that block are paid to the mining pool. The mining pool pays out a portion of these proceeds to individual miners based on how many shares they generated. For example, if the mining pool’s target threshold is 100 times lower than the network target threshold, 100 shares will need to be generated on average to create a successful block, so the mining pool can pay 1/100th of its payout for each share received. Different mining pools use different reward distribution systems based on this basic share system.
In both solo and pool mining, the mining software needs to get the information necessary to construct block headers. This subsection describes, in a linear way, how that information is transmitted and used. However, in actual implementations, parallel threads and queuing are used to keep ASIC hashers working at maximum capacity,
The simplest and earliest method was the now-deprecated Bitcoin Core
getwork RPC, which constructs a header for the miner directly. Since a
header only contains a single 4-byte nonce good for about 4 gigahashes,
many modern miners need to make dozens or hundreds of
a second. Solo miners may still use
getwork on v0.9.5 or below, but most pools today
discourage or disallow its use.
A complete dump of the transactions
bitcoindor the mining pool suggests including in the block, allowing the mining software to inspect the transactions, optionally add additional transactions, and optionally remove non-required transactions.
Using the transactions received, the mining software adds a nonce to the coinbase extra nonce field and then converts all the transactions into a merkle tree to derive a merkle root it can use in a block header. Whenever the extra nonce field needs to be changed, the mining software rebuilds the necessary parts of the merkle tree and updates the time and merkle root fields in the block header.
getblocktemplate is sent over HTTP. To
ensure they get the most recent work, most miners use HTTP longpoll to
getblocktemplate request open at all times. This allows the
mining pool to push a new
getblocktemplate to the miner as soon as any
miner on the peer-to-peer network publishes a new block or the pool
wants to send more transactions to the mining software.
The information necessary to construct a coinbase transaction paying the pool.
The parts of the merkle tree which need to be re-hashed to create a new merkle root when the coinbase transaction is updated with a new extra nonce. The other parts of the merkle tree, if any, are not sent, effectively limiting the amount of data which needs to be sent to (at most) about a kilobyte at current transaction volume.
Using the coinbase transaction received, the mining software adds a nonce to the coinbase extra nonce field, hashes the coinbase transaction, and adds the hash to the received parts of the merkle tree. The tree is hashed as necessary to create a merkle root, which is added to the block header information received. Whenever the extra nonce field needs to be changed, the mining software updates and re-hashes the coinbase transaction, rebuilds the merkle root, and updates the header merkle root field.
getblocktemplate, miners using Stratum cannot inspect or add
transactions to the block they’re currently mining. Also unlike
getblocktemplate, the Stratum protocol uses a two-way TCP socket directly,
so miners don’t need to use HTTP longpoll to ensure they receive
immediate updates from mining pools when a new block is broadcast to the
Resources: The GPLv3 BFGMiner mining software and AGPLv3 Eloipool mining pool software are widely-used among miners and pools. The libblkmaker C library and python-blkmaker library, both MIT licensed, can interpret GetBlockTemplate for your programs.